| No. | Brand | J | F | f | T | A | s | S | r |
| WE6Y5/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 7007CSN24TRV1VS-01 | NSK | - | - | - | - | - | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 9/12 | - | - | - | - | - | - | - | - | - |
| PC800-8 | - | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 0821200230 | Rexroth | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| N20.5% | - | - | - | - | - | - | - | - | - |
| Zdr10dp1-40b/75y | - | - | - | - | - | - | - | - | - |
| (BDZ-155-A(ZA-2)) | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| NJ209EM | Rollway | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| Chloride30% | - | - | - | - | - | - | - | - | - |
| 83-87 | koyo | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| 6219-2Z/C3 | - | - | - | - | - | - | - | - | - |
| J-45548 | - | - | - | - | - | - | - | - | - |
| AHX215 Withdrawal Sleeve 70x75x34.5mm | Cage Type:Steel; B:23mm; Seals or Shields:Two Rubber Seals; d:40mm; Clearance:C3; Dynamic Load Rating (kN):40.5; SKU:6308dduc3-nsk; D:90mm; Reference Speed Rating (r/min):--; Static Load Rating (kN):24; |
| CMVL 3860-ML MicroVibe P Kit | Oil Limiting Speed (r/min):4300; Seals or Shields:Open Type; d:130mm; Grease Limiting Speed (r/min):3600; SKU:btw130ctn9/sp-skf; D:200mm; Weight:7.60 KGS; Availability:In Stock; Dynamic Load Rating (kN):106; Cage Type:Plastic; |
| 50 mm x 110 mm x 40 mm 86841 / CR86841 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Single Rubber Seal; B:13mm; Cage Type:Steel; Static Load Rating (kN):8; d:30mm; Fatigue Load Rating (kN):0.39; Clearance:Standard; Limiting Speed Rating (r/min):8500; Weight:0.13 KGS; D:55mm; Size (mm):50 mm x 110 mm x 40 mm ; |
| EAZ 226 Induction Heater | Availability:In Stock; Weight:0.20 KGS; Cage Type:Steel; B:5mm; SKU:697-2rs-zen; d:7mm; Clearance:Standard; Seals or Shields:Two Rubber Seals; D:17mm; |
| AH3032 Withdrawal Sleeve(matched Bearing:23032CCK/W33, 23032CAK/W33, C3032K) | Clearance:Standard; Limiting Speed Rating (r/min):48000; D:16mm; Availability:In Stock; Reference Speed Rating (r/min):95000; d:5mm; Seals or Shields:Open Type; B:5mm; Static Load Rating (kN):0.38; SKU:625-2rz-skf; |
| H2309 Adapter Sleeve 40x65x50mm | Cage Type:Steel; Weight:38.90 KGS; d:180mm; B:112mm; SKU:23236ce4-nsk; Dynamic Load Rating (kN):1300; Availability:In Stock; Grease Limiting Speed (r/min):850; Seals or Shields:Open Type; Oil Limiting Speed (r/min):1100; |
| TRA4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x0.8mm | Fatigue Load Rating (kN):--; Dynamic Load Rating (kN):6.8; SKU:6201zznr-nsk; Clearance:Standard; Cage Type:Steel; d:12mm; Availability:In Stock; Seals or Shields:Two Metal Shields; Static Load Rating (kN):3.05; B:10mm; |
| 85181 / CR85181 Stainless Speedi Sleeve For Shaft Repair | Oil Limiting Speed (r/min):17000; Clearance:Standard; Dynamic Load Rating (kN):10; Weight:0.02 KGS; SKU:1204kj-nsk; D:47mm; B:14mm; Seals or Shields:Open Type; Grease Limiting Speed (r/min):14000; Cage Type:Steel; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
TRD5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x3.2mm Video