| No. | Brand | J | F | f | T | A | s | S | r |
| 24V | - | - | - | - | - | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| 42060 | - | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| 4900 | SKF | - | - | - | - | - | - | - | - |
| C4032-2CS5V/GEM9 | - | - | - | - | - | - | - | - | - |
| 200 | NTN | - | - | - | - | - | - | - | - |
| Xk6140 | - | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| AH24140 Withdrawal Sleeve(matched Bearing:24140CCK,24140CAK,24140CCK30/W33, C4140K30V) | SKU:16038-fag; D:290mm; Cage Type:Steel; Weight:7.04 KGS; Availability:In Stock; Fatigue Load Rating (kN):6.3; d:190mm; B:31mm; Clearance:Standard; Static Load Rating (kN):166; |
| AH24138 Withdrawal Sleeve(matched Bearing:24138CCK,24138CAK, 24138CCK30/W33, C4138K30V) | Accessories:Two Shields; B:66.70 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm; d:70.000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; |
| CP480105 Thrust Plate 80x104.3x4mm | B5:82 mm; D:650 mm; Calculation factor e:0.28; Reference speed:530 r/min; Basic static load rating C0:7650 kN; db min.:421 mm; da max.:475 mm; Calculation factor Y0:2.5; d2 ≈:475 mm; r1,2 min.:6 mm; |
| CR99121 Stainless Steel Speedi Sleeve For Shaft Repair | d:60mm; Clearance:Standard; Availability:In Stock; Limiting Speed Rating (r/min):4400; Cage Type:Steel; Static Load Rating (kN):174; Weight:1.10 KGS; SKU:22212ejw33-timken; B:28mm; D:110mm; |
| 70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter 99552 / CR 99552 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):660; SKU:24048-e1-c3-fag; Availability:In Stock; D:400mm; Limiting Speed Rating (r/min):1200; Cage Type:Steel; Weight:80.70 KGS; Seals or Shields:Open Type; Dynamic Load Rating (kN):2120; B:160mm; Size (mm):70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter ; |
| TRC6074 Thrust Bearing Ring / Thrust Needle Bearing Washer 95.25x117.475x2.4mm | Duty cycle tolerance ±:10 %; Limiting speed:300 r/min; Cable connector type:AMP Superseal; Duty cycle:50 %; Number of pulses per revolution N:256; Phase shift output signal:90 °; Mass sensor unit:0.57 kg; Period accuracy ±:8 %; Phase shift output signal tolerance ±:30 °; |
| EAZ 246 Induction Heater | Clearance:Standard; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):30000; Cage Type:Plastic; d:65mm; Static Load Rating (kN):150.6; SKU:s7013cega/p4a-skf; Availability:In Stock; Weight:0.43 KGS; Dynamic Load Rating (kN):20.3; |
| HMV180E / HMV 180E Hydraulic Nut 902x1075x103mm | Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:13.62; Product Group:M06288; Component Description:Take Up Bearing Only; Rolling Element:Spherical Roller Bearing; Housing Style:Unit Only; Mounting Method:Concentric Collar; Compatible Take Up Frame:QMTF; Adjustment Travel Length:0; Insert Part Number:22215; Housing Material:Cast Steel; Other Features:Double Row | Non-expansion | Three Lip Nitrile Rubber Seal | Steel Cage | With Set Screw; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TRC5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x2.4mm Video