| No. | Brand | J | F | f | T | A | s | S | r |
| 4 | - | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| 20W/30W/50W | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 1988-1993 | Timken | - | - | - | - | - | - | - | - |
| 30313A | - | - | - | - | - | - | - | - | - |
| SL192317 | - | - | - | - | - | - | - | - | - |
| 271418 | - | - | - | - | - | - | - | - | - |
| 30X55X32 | - | - | - | - | - | - | - | - | - |
| Mg15g1.2 | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| 25420 | - | - | - | - | - | - | - | - | - |
| 1lb | - | - | - | - | - | - | - | - | - |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| H312X Adapter Sleeve 55x80x47mm | Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):15; Weight:0.44 KGS; Dynamic Load Rating (kN):46.5; Grease Limiting Speed (r/min):2200; D:110mm; SKU:51117-nsk; Clearance:Standard; d:85mm; |
| 99387 / CR99387 Stainless Speedi Sleeve For Shaft Repair | d:80mm; Limiting Speed Rating (r/min):3400; Availability:In Stock; SKU:21316ejw33c4-timken; D:170mm; Reference Speed Rating (r/min):4100; B:39mm; Dynamic Load Rating (kN):363; Clearance:C4; Weight:4.20 KGS; |
| 70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter 99552 / CR 99552 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):660; SKU:24048-e1-c3-fag; Availability:In Stock; D:400mm; Limiting Speed Rating (r/min):1200; Cage Type:Steel; Weight:80.70 KGS; Seals or Shields:Open Type; Dynamic Load Rating (kN):2120; B:160mm; Size (mm):70 x 5.906 Inch | 150 Millimeter x 1.378 Inch | 35 Millimeter ; |
| CP4060 Thrust Plate 40x59.5x0.8mm | d:30.000 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:11800 N; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:13000 rpm; Fillet Radius ra:1.00 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:16800 N; |
| FTRE6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x3mm | D:140mm; B:24mm; Availability:In Stock; SKU:3mm9118wicrsum-timke; Static Load Rating (kN):75.2; Weight:1.17 KGS; Cage Type:Plastic; d:90mm; Dynamic Load Rating (kN):65.8; Clearance:Standard; |
| 85973 / CR85973 Stainless Speedi Sleeve For Shaft Repair | B:13mm; Dynamic Load Rating (kN):18.1; D:80mm; Clearance:Standard; Grease Limiting Speed (r/min):14900; Static Load Rating (kN):16.8; Preload:Light; d:55mm; Availability:In Stock; Cage Type:Plastic; |
| VHIN 550 Bearing Induction Heater | Cage Type:Brass; B:134mm; Limiting Speed Rating (r/min):1400; D:540mm; Weight:0.02 KGS; Seals or Shields:Open Type; Reference Speed Rating (r/min):800; d:360mm; Dynamic Load Rating (kN):2800; Availability:In Stock; |
| HMV47E / HMV 47E Hydraulic Nut 237x326x54mm | Basic Radial Load Rating-Static SCO:61800 lbf; Basic Interchange SPLIT:-; Accessories:Mast Guide Type- 309; Basic Interchange BCA:-; Basic Interchange NSK:-; Basic Interchange:-; Basic Interchange MCGILL:-; Basic Radial Load Rating-Dynamic DC:18400 lbf; Basic Interchange NDH:-; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
TRA4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x0.8mm Video