| No. | Brand | J | F | f | T | A | s | S | r |
| 10W | - | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| CL2B-DAL2 | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| ,I010 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| N3058 | - | - | - | - | - | - | - | - | - |
| 429,460. | - | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| /100W/Ce/RoHS/Lighting | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| E55 | INA | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| 4x8x3 | - | - | - | - | - | - | - | - | - |
| 90259 / CR90259 Stainless Speedi Sleeve For Shaft Repair | Design variant/feature:BC4.8/W33WI; K:7.5 mm; D:710 mm; Basic static load rating C0:21600 kN; D1 ≈:645.6 mm; α:20 °; r1,2 min.:18 mm; r3,4 min.:5 mm; d:500 mm; F:558 mm; |
| AHX3122 Withdrawal Sleeve(matched Bearing:2222K, 23122CCK/W33, 22222EK, C3022K, C2222K) | d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; Accessories:Two Shields; Fillet Radius ra:0.64 mm; B:8.00 mm; Sealed Speed Rating n3:20000 rpm; Grease Speed Rating Open/Shielded n1:28000 rpm; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4620 N; Basic Static Radial Load Rating Co:1960 N; |
| M 65x80x10 Oil Seal 65x80x10mm | Static Load Rating (kN):1890; SKU:22330ejw33c4-timken; Weight:40.60 KGS; Cage Type:Steel; D:320mm; Limiting Speed Rating (r/min):1500; Reference Speed Rating (r/min):1600; Availability:In Stock; Seals or Shields:Open Type; B:108mm; |
| 86175 / CR86175 Stainless Speedi Sleeve For Shaft Repair | B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; Housing:FYAWK 506 L; L:83 mm; Mass bearing unit:0.48 kg; J1:31.8 mm; J:47.6 mm; |
| CP614 Thrust Plate 6x13.4x0.8mm | D:140mm; Weight:1.45 KGS; Seals or Shields:Open Type; Speed Rating (r/min):10100; Static Load Rating (kN):102.9; Dynamic Load Rating (kN):77; d:80mm; B:26mm; Cage Type:Plastic; Availability:In Stock; |
| AH3172GH Withdrawal Sleeve Supplier | Axial static load carrying capacity:9.8 kN; b:3 mm; Associated spanner:HN 0; B:4 mm; Lock washer / Locking clip:MB 0; Mass lock nut:0.004 kg; G:M 10x0.75; h:2 mm; d3:18 mm; d1:13.5 mm; |
| 90120 / CR90120 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:38mm; Cage Type:Plastic; Speed Rating (r/min):7200; Availability:In Stock; Dynamic Load Rating (kN):160.1; d:110mm; Clearance:Standard; D:200mm; Weight:4.49 KGS; |
| AOH32/710G (232/710CAK/W33, 232/710CAK, 232/710CCK Bearing Withdrawal Sleeve) | Static Load Rating (kN):1570; SKU:22234-e1-k-c3-fag; Seals or Shields:Open Type; Reference Speed Rating (r/min):1780; Weight:0.02 KGS; Limiting Speed Rating (r/min):2400; Availability:In Stock; D:310mm; Cage Type:Steel; Fatigue Load Rating (kN):140; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
TRB4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x1.6mm Video