| No. | Brand | J | F | f | T | A | s | S | r |
| TRA5118 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| (BDZ-155-A(ZA-2)) | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| 18*10W | - | - | - | - | - | - | - | - | - |
| D3W1CNYC | Parker | - | - | - | - | - | - | - | - |
| Q235 | INA | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| (10) | - | - | - | - | - | - | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| 10W | - | - | - | - | - | - | - | - | - |
| 5] | - | - | - | - | - | - | - | - | - |
| (F01,F02,F04,F06,F07,F10,F13) | - | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | 66.675 mm | - | - | - | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| FTRD4565 Thrust Bearing Ring / Thrust Needle Bearing Washer 45x65x2.5mm | Permissible sliding velocity v min.:0 m/s; D:190 mm; h:172 mm; d:170 mm; D1:205 mm; Mass bushing:5.4 kg; Permissible sliding velocity v max.:0.5 m/s; B:100 mm; Specific static load factor K0:45 N/mm²; B1:10 mm; |
| CR99827 Stainless Steel Speedi Sleeve For Shaft Repair | J max.:225.425 mm; s:32.941 mm; H2:41.275 mm; J min.:209.55 mm; B:65.484 mm; Basic dynamic load rating C:193 kN; Limiting speed:3800 r/min; Mass bearing unit:8.62 kg; H:144.463 mm; A:88.9 mm; |
| CR99215 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:335000 N; Oil Speed Rating n2:3600 rpm; B:104.00 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:307000 N; D:210.0000 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:2000 rpm; d:85.000 mm; |
| TRB4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x1.6mm | B:2.25 Inch; SKU:mjt6-rhp; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; d:6 Inch; D:12 Inch; |
| Cylindrical Roller Bearings NU336-E-XL-TVP2 180x380x75mm | Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; PG:1/4 NPT; L:558.8 mm; J max.:488.95 mm; J min.:441.325 mm; Cap bolt:4 x 3/4-10 UNC; P60°:226 kN; Max. speed for Taconite seal:560 r/min; |
| CP46085 Thrust Plate 60x84.3x4mm | Cage Type:Plastic; Oil Limiting Speed (r/min):7500; Clearance:Standard; d:160mm; D:240mm; Preload:Light; Weight:5.15 KGS; SKU:7032acdga/p4a-skf; Static Load Rating (kN):204; Fatigue Load Rating (kN):6.2; |
| CR99094 Stainless Steel Speedi Sleeve For Shaft Repair | SKU:3206b-2rsnrtn-nsk; Static Load Rating (kN):20100; D:62mm; Seals or Shields:Two Rubber Seals; d:30mm; Dynamic Load Rating (kN):29100; Availability:In Stock; B:23.8mm; Grease Limiting Speed (r/min):7100; Cage Type:Plastic; |
| H312X Adapter Sleeve 55x80x47mm | Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):15; Weight:0.44 KGS; Dynamic Load Rating (kN):46.5; Grease Limiting Speed (r/min):2200; D:110mm; SKU:51117-nsk; Clearance:Standard; d:85mm; |
TRE4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x4mm Video