| No. | Brand | J | F | f | T | A | s | S | r |
| 220g | INA | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| SL01 | - | - | - | - | - | - | - | - | - |
| 18*10W | - | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| 6HK1 | INA | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | - | - | - | - | - | - | - |
| 3000 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 36W | INA | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| 4WE10C3X/CW230N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| (50W | - | - | - | - | - | - | - | - | - |
| F6800ZZ | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 30X55X32 | - | - | - | - | - | - | - | - | - |
| 4x8x3 | - | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| 99363 / CR99363 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:15900 N; Fillet Radius ra:1.00 mm; d:20.000 mm; Basic Static Radial Load Rating Co:10200 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Grease Speed Rating Open/Shielded n1:11000 rpm; B:15.00 mm; Accessories:Two Shields; D:52.0000 mm; |
| 86454 / CR86454 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:160mm; Oil Limiting Speed (r/min):3000; B:32.5mm; SKU:30218-ntn; d:90mm; Clearance:Standard; Condition:New; Dynamic Load Rating (kN):208; Availability:In Stock; |
| AOH241/710 (241/710ECAK30/W33, 241/710CCK, 241/710CAK, 241/710CCK/W33 Bearing Withdrawal Sleeve) | D:160mm; B:40mm; Clearance:Standard; Cage Type:Brass; Static Load Rating (kN):375; SKU:22218-e1a-k-m-fag; d:90mm; Weight:0.02 KGS; Reference Speed Rating (r/min):3400; Dynamic Load Rating (kN):345; |
| ZM50 Precision Locknut (M50x1.5)x70x14mm | ra max.:1 mm; b:9 mm; Design (sliding contact surface combination):Steel/steel; Basic static load rating C0:1270 kN; Specific dynamic load factor K:150 N/mm²; Da max.:105.7 mm; D:111.125 mm; B:104.775 mm; da max.:85.9 mm; Sealing solution:Triple-lip seals; |
| HMV16E / HMV 16E Hydraulic Nut (M80x2)x146x43mm | Cage Type:Steel; Oil Limiting Speed (r/min):5600; Availability:In Stock; d:75mm; Clearance:Standard; Seals or Shields:Single Metal Shield; D:130mm; Static Load Rating (kN):49.5; Grease Limiting Speed (r/min):4800; Weight:1.19 KGS; |
| 100 mm x 180 mm x 46 mm TRA1423 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x36.5x0.8mm | SKU:2220-qbl; d:100mm; Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:Standard; Cage Type:Steel; D:180mm; B:46mm; Size (mm):100 mm x 180 mm x 46 mm ; |
| CP1.57095 Thrust Plate 70x94.3x1.5mm | Grease Speed Rating Open/Shielded n1:3600 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Speed Rating n3:2200 rpm; D:165.0000 mm; Accessories:Two Seals; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; B:18.00 mm; d:130.000 mm; Basic Dynamic Radial Load Rating C:37700 N; |
| CR99811 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Reference Speed Rating (r/min):6700; Limiting Speed Rating (r/min):4800; Fatigue Load Rating (kN):2.28; Availability:In Stock; D:180mm; d:85mm; Clearance:Standard; Dynamic Load Rating (kN):140; Seals or Shields:Open Type; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
TRA3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x0.8mm Video