| No. | Brand | J | F | f | T | A | s | S | r |
| 50 | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| 24755 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 2303-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| (20.5% | - | - | - | - | - | - | - | - | - |
| 5421 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| BMV630 | - | - | - | - | - | - | - | - | - |
| 1lb | - | - | - | - | - | - | - | - | - |
| S44 | RBC | - | - | - | - | - | - | 4.763 mm | - |
| 1210EKTN9 | SKF | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| (Qty.10) | - | - | - | - | - | - | - | - | - |
| 6N1 | SKF | - | - | - | - | - | - | - | - |
| 11 | - | - | - | - | - | - | - | - | - |
| 1100.32.00. | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| NJ2309 | - | - | - | - | - | - | - | - | - |
| (DSM-14T) | - | - | - | - | - | - | - | - | - |
| 300-500kg/h | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| SQP41-50-2/3/4/5/6/7/8/9/10/11/12/14 | TOKYO | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| H312 Adapter Sleeve 55x80x47mm | Availability:In Stock; d:280mm; Cage Type:Brass; Clearance:Standard; D:460mm; Dynamic Load Rating (kN):2780; Seals or Shields:Open Type; SKU:23156embw507c08-timk; Limiting Speed Rating (r/min):770; Weight:96.80 KGS; |
| 99400 / CR99400 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; d:30mm; SKU:6306-zz/c3-qbl; Cage Type:Steel; B:19mm; Weight:0.02 KGS; Seals or Shields:Two Metal Shields; Clearance:C3; D:72mm; |
| CR99849 Stainless Steel Speedi Sleeve For Shaft Repair | B:82mm; Static Load Rating (kN):1760; d:200mm; Limiting Speed Rating (r/min):1500; Seals or Shields:Open Type; Cage Type:Steel; Reference Speed Rating (r/min):1800; Clearance:Standard; D:310mm; Availability:In Stock; |
| 99349 / CR99349 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):6100; Weight:4.34 KGS; SKU:6222 -timken; Seals or Shields:Open Type; d:110mm; Dynamic Load Rating (kN):144; Cage Type:Steel; B:38mm; Availability:In Stock; Static Load Rating (kN):117; |
| FTRD1629 Thrust Bearing Ring / Thrust Needle Bearing Washer 16x29x2.5mm | Cage Type:Plastic; D:210mm; Weight:0.02 KGS; Seals or Shields:Open Type; Availability:In Stock; B:53mm; d:140mm; Clearance:Standard; SKU:23028-e1-k-tvpb-qbl; |
| FTRA1528 Thrust Bearing Ring / Thrust Needle Bearing Washer 15x28x1mm | Basic Static Radial Load Rating Co:335000 N; Fillet Radius ra:3.00 mm; Oil Speed Rating n2:2800 rpm; d:85.000 mm; Fillet Radius rb:1.00 mm; D:210.0000 mm; Grease Speed Rating n1:2000 rpm; Basic Dynamic Radial Load Rating C:307000 N; B:104.00 mm; |
| 90809 / CR90809 Stainless Speedi Sleeve For Shaft Repair | d:360mm; SKU:23072-e1a-mb1-fag; Seals or Shields:Open Type; D:540mm; Reference Speed Rating (r/min):800; B:134mm; Limiting Speed Rating (r/min):1400; Static Load Rating (kN):4650; Dynamic Load Rating (kN):2800; Cage Type:Brass; |
| CPR15160270 Thrust Plate 160x270x15mm | Fatigue load limit Pu:1930 kN; D1:1066 mm; Reference speed:120 r/min; ra max.:4 mm; r1,2 min.:5 mm; Da max.:1095 mm; B:45 mm; D:1250 mm; Limiting speed:240 r/min; Basic static load rating C0:36500 kN; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
TRC2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x2.4mm Video