| No. | Brand | J | F | f | T | A | s | S | r |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 697-2RS | - | - | - | - | - | - | - | - | - |
| Ni200/201pure | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| QAR81788 | John Deere | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| (21% | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| 7202BBTVP | fag | - | - | - | - | - | 14 mm | - | - |
| 801002 | - | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| 30X55X32 | - | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | 185 mm | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| (10-5-10) | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| (Zhr17) | - | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| MSR22x1.5 Precision Locknut / MSR-M22x1.5 Locking Nut (M22x1.5)x40x18mm | Weight:0.02 KGS; B:23mm; D:72mm; Cage Type:Steel; SKU:22207-e1-k-qbl; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; |
| 99326 / CR99326 Stainless Speedi Sleeve For Shaft Repair | B:22mm; Dynamic Load Rating (kN):62.4; Preload:Light; Seals or Shields:Open Type; Static Load Rating (kN):58.5; Fatigue Load Rating (kN):2.45; Grease Limiting Speed (r/min):9500; d:80mm; D:125mm; Availability:In Stock; |
| TRC1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x2.4mm | Speed Rating-Open and Shielded-Oil OSO:4000 rpm; D:170.0000 mm; Basic Radial Load Rating-Dynamic DC:138000 N; Width - Outer Ring B0:39.0 mm; Basic Radial Load Rating-Static SCO:129000 N; Speed Rating-Open and Shielded-Grease OSG:3300 rpm; Fillet Radius ra:2.00 mm; Accessories:300WI Filling Notch; Diameter E:109.0 mm; d:80.000 mm; |
| 86973 / CR86973 Stainless Speedi Sleeve For Shaft Repair | Preload class B GB:130 N; Mass bearing:0.074 kg; Preload class A GA:45 N; rb max.:0.3 mm; Static axial stiffness, preload class C:50 N/µm; Calculation factor f1:1; Calculation factor f2A:1; Db max.:44.6 mm; Da max.:43.8 mm; Preload class C GC:260 N; |
| CR99055 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):167; SKU:6226mc3-nsk; D:230mm; Static Load Rating (kN):146; Seals or Shields:Open Type; Availability:In Stock; Clearance:C3; Grease Limiting Speed (r/min):2400; Cage Type:Brass; Weight:5.96 KGS; |
| CP2614 Thrust Plate 6x13.4x2mm | B:73mm; Weight:0.02 KGS; d:100mm; SKU:22320-e1a-k-m-qbl; D:215mm; Seals or Shields:Open Type; Availability:In Stock; Cage Type:Brass; Clearance:Standard; |
| CR99083 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Fatigue Load Rating (kN):10.8; Availability:In Stock; Limiting Speed Rating (r/min):2000; Cage Type:Steel; SKU:bs2-2209-2rsk/vt143-; D:85mm; Dynamic Load Rating (kN):102; Seals or Shields:Two Rubber Seals; d:45mm; |
| AOH3060(23060CCK/W33, 23060CAK/W33, 23060CCK, 23060CAK,C3060KM Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):7500; Condition:New; Clearance:Standard; Fatigue Load Rating (kN):0.48; Static Load Rating (kN):11.2; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; d:25mm; B:17mm; D:62mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
86091 / CR86091 Stainless Speedi Sleeve For Shaft Repair Video