| No. | Brand | J | F | f | T | A | s | S | r |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| 19360 | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 1220 | SKF | - | - | - | - | - | - | - | - |
| 3659 | Timken | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| N211W | NSK | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4T-LM48548 | Bower | - | - | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| 150kg | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| 6way | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 18*10W | - | - | - | - | - | - | - | - | - |
| sae4130 | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| 6704ZZ | - | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| Sg02 | - | - | - | - | - | - | - | - | - |
| AOH3080G(23080CCK/W33, C3080KM, 23080CCK, 23080CAK Bearing Withdrawal Sleeve) | r min.:0.4 mm; Fatigue load limit Pu:0.57 kN; Fw:10 mm; Designation bearing:BK 1012 RS; D:14 mm; Basic dynamic load rating C:4.29 kN; C1 min.:10.4 mm; Mass bearing:0.0043 kg; Basic static load rating C0:5.3 kN; C:12 mm; |
| 99562 / CR 99562 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Dynamic Load Rating (kN):0.88; Cage Type:Steel; Fatigue Load Rating (kN):0.015; Seals or Shields:Two Rubber Seals; Reference Speed Rating (r/min):110000; Static Load Rating (kN):0.35; B:5mm; D:13mm; Clearance:Standard; |
| LAGF 50 Grease Filler Pump | Limiting Speed Rating (r/min):3200; Seals or Shields:Open Type; Weight:4.20 KGS; d:95mm; Reference Speed Rating (r/min):3900; Static Load Rating (kN):441; D:170mm; Clearance:C4; Cage Type:Steel; B:43mm; |
| 99365 / CR99365 Stainless Speedi Sleeve For Shaft Repair | H:169.863 mm; Bearing limiting speed:4500 r/min; ba:30.163 mm; J max.:279.4 mm; Lock nut:AN 16; h:49.212 mm; A2:126.603 mm; R1:53.181 mm; Pa:20.5 kN; Appropriate attachment bolt size G:0.75 in; |
| TRE1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x4mm | B:28.00 mm; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:83000 N; d:85.000 mm; D:150.0000 mm; Basic Dynamic Radial Load Rating C:90400 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4900 rpm; Fillet Radius rb:1.00 mm; |
| HMV50E / HMV 50E Hydraulic Nut 252x342x55mm | Seals or Shields:Open Type; Oil Limiting Speed (r/min):43000; Cage Type:Plastic; D:55mm; Availability:In Stock; Preload:Light; Clearance:Standard; Static Load Rating (kN):7.65; Weight:0.11 KGS; Dynamic Load Rating (kN):13.8; |
| 99587 / CR 99587 Stainless Speedi Sleeve For Shaft Repair | d:240mm; Static Load Rating (kN):1340; Reference Speed Rating (r/min):1600; Limiting Speed Rating (r/min):1300; Seals or Shields:Open Type; D:320mm; Cage Type:Brass; Dynamic Load Rating (kN):785; Weight:12.90 KGS; SKU:23948emw33c3-timken; |
| VHIS 400 Bearing Induction Heater | Threads per inch:12; B:24.867 mm; Mass adapter sleeve assembly:8.15 kg; d3 max.:195.402 mm; B1:142.519 mm; Lock washer:W 30; Sleeve:S 130x5.3/8; d1:136.525 mm; B4:28.575 mm; d:150 mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
TRE1828 Thrust Bearing Ring / Thrust Needle Bearing Washer 28.575x44.45x4mm Video