| No. | Brand | J | F | f | T | A | s | S | r |
| 4 | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| 962985 | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| A10Vo | Rexroth | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| E55 | INA | - | - | - | - | - | - | - | - |
| TCR2 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| NJ2309 | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| 2.0mm | - | - | - | - | - | - | - | - | - |
| 478362 | - | - | - | - | - | - | - | - | - |
| AH2356H Withdrawal Sleeve Supplier | Seals or Shields:Open Type; Oil Limiting Speed (r/min):19000; Weight:0.60 KGS; Grease Limiting Speed (r/min):12000; Preload:Medium; B:20mm; Availability:In Stock; Cage Type:Plastic; D:110mm; Fatigue Load Rating (kN):1.93; |
| EAZ 202 Induction Heater | d:20mm; Weight:0.02 KGS; Seals or Shields:Open Type; B:21mm; Availability:In Stock; D:52mm; Cage Type:Brass; Clearance:C3; SKU:2304mc3-qbl; |
| ZM85 Precision Locknut (M85X2)x110x18mm | B:18mm; d:25mm; Cage Type:Plastic; SKU:2205etn9-qbl; Seals or Shields:Open Type; Clearance:Standard; D:52mm; Availability:In Stock; Weight:0.02 KGS; |
| AS90120 Thrust Needle Roller Bearing Washer 90x120x1mm | Lock washer / Locking clip:MS 30/600-530; b:40 mm; Associated spanner:TMFN 500-600; d3:630 mm; d2:558 mm; Mass lock nut:45.8 kg; d1:590 mm; G:Tr 530x6; B5:90 mm; h:20 mm; |
| HMV36E / HMV 36E Hydraulic Nut (M180x3)x256x48mm | Basic Dynamic Radial Load Rating C:138000 N; Fillet Radius ra:2.10 mm; B:58.70 mm; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; D:140.0000 mm; |
| AOH3172G(23172CCK, 23172CAK, 23172CCK/W33, C3172KM Bearing Withdrawal Sleeve) | Basic Dynamic Radial Load Rating C:45700 N; Accessories:One Shield & Snap-Ri; B:23.00 mm; Basic Static Radial Load Rating Co:32500 N; d:30.000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Fillet Radius ra:1.50 mm; D:90.0000 mm; |
| H3152X Adapter Sleeve Supplier | Oil Speed Rating n2:3600 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:176000 N; D:150.0000 mm; B:49.20 mm; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:142000 N; Sealed Speed Rating n3:2600 rpm; |
| EAZ 292 Induction Heater | Clearance:Standard; Fatigue Load Rating (kN):212; D:440mm; d:320mm; Limiting Speed Rating (r/min):1500; Availability:In Stock; Dynamic Load Rating (kN):1430; Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):2700; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
TRD1828 Thrust Bearing Ring / Thrust Needle Bearing Washer 28.575x44.45x3.2mm Video