| No. | Brand | J | F | f | T | A | s | S | r |
| 50W | - | - | - | - | - | - | - | - | - |
| 1-10pcs | - | - | - | - | - | - | - | - | - |
| 21310 | fag | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| 38, | Parker | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 6mm | INA | - | - | - | - | - | - | - | - |
| 478362 | - | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| 1985-1987 | koyo | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| HMV82E / HMV 82E Hydraulic Nut 412x534x72mm | Availability:In Stock; d:110mm; Weight:0.02 KGS; Clearance:Standard; SKU:1222-qbl; Seals or Shields:Open Type; D:200mm; Cage Type:Steel; B:38mm; |
| ZM08 Precision Locknut (M8x0.75)x16x8mm | Seals or Shields:Open Type; Dynamic Load Rating (kN):14.4; d:30mm; Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):35300; Weight:0.02 KGS; Preload:Light; Cage Type:Plastic; Grease Limiting Speed (r/min):23600; |
| HMV50E / HMV 50E Hydraulic Nut 252x342x55mm | Seals or Shields:Open Type; Oil Limiting Speed (r/min):43000; Cage Type:Plastic; D:55mm; Availability:In Stock; Preload:Light; Clearance:Standard; Static Load Rating (kN):7.65; Weight:0.11 KGS; Dynamic Load Rating (kN):13.8; |
| AS2542 Thrust Needle Roller Bearing Washer 25x42x1mm | Availability:In Stock; B:2.5mm; d:8mm; Seals or Shields:Open Type; SKU:mr128-zen; D:12mm; Clearance:Standard; Weight:0.20 KGS; Cage Type:Steel; |
| 1208TN1 Self-aligning Ball Bearing 40x80x18mm | Dynamic Load Rating (kN):159; D:250mm; Grease Limiting Speed (r/min):4800; B:33mm; Static Load Rating (kN):200; Clearance:Standard; Oil Limiting Speed (r/min):7000; SKU:71936acdga/p4a-skf; Cage Type:Plastic; Seals or Shields:Open Type; |
| AH209 Withdrawal Sleeve 40x45x26mm | Clearance:Standard; Seals or Shields:Open Type; Cage Type:Steel; d:70mm; B:35mm; Reference Speed Rating (r/min):8500; SKU:1314-skf; Weight:0.02 KGS; Fatigue Load Rating (kN):1.34; Limiting Speed Rating (r/min):6000; |
| CR99828 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bearing:67 kg; Basic dynamic load rating C:1340 kN; T:80.963 mm; Calculation factor e:0.37; Da max.:660 mm; D:692.15 mm; r1,2 min.:6.4 mm; C:61.913 mm; Ca min.:13 mm; Da min.:646 mm; |
| AH3040G Withdrawal Sleeve(matched Bearing:23040CCK,23040CAK, 23040CCK/W33, C3040K) | Accessories:One Seal; Sealed Speed Rating n3:0 rpm; Basic Static Radial Load Rating Co:140000 N; D:300.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; B:28.00 mm; d:240.000 mm; Oil Speed Rating Open/Shielded n2:2200 rpm; Grease Speed Rating Open/Shielded n1:1800 rpm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TRD1423 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x36.5x3.2mm Video