| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 707-98-58240 | - | - | - | - | - | - | - | - | - |
| NJ219G | Nachi | - | - | - | - | - | - | - | - |
| Dh220 | - | - | - | - | - | - | - | 4.763 mm | - |
| L650xw440xh345mm | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| HP22 | Danfoss | - | - | - | - | - | - | - | - |
| 65ml-33g | - | - | - | - | - | - | - | - | - |
| /DV12V/DC24V/Ce/RoHS/Strip/Lamp/Lighting | - | - | - | - | - | - | - | - | - |
| 15mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| T6DCM | - | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| PC400-7 | - | - | - | - | - | - | - | - | - |
| 4074 | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| CH4N2O | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| EAZ 265 Induction Heater | Fillet Radius rb:0.040 in; Fillet Radius ra:0.08 in; B:0.7500 in; Basic Dynamic Radial Load Rating C:47500 N; D:5.0000 in; Oil Speed Rating n2:7500 rpm; Grease Speed Rating n1:4800 rpm; Basic Static Radial Load Rating Co:51000 N; d:3.500 in; |
| AH320 Withdrawal Sleeve 95x100x59mm | Weight:0.02 KGS; Availability:In Stock; d:80mm; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; B:39mm; SKU:21316-e1-qbl; D:170mm; |
| LAGG 18AE Grease Pump | Basic Static Radial Load Rating Co:146000 N; Grease Speed Rating Open/Shielded n1:3100 rpm; Fillet Radius ra:2.50 mm; Accessories:Without Accessories; d:85.000 mm; Oil Speed Rating Open/Shielded n2:3800 rpm; B:41.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:147000 N; |
| AH328 Withdrawal Sleeve 135x140x77mm | Reference Speed Rating (r/min):8500; Dynamic Load Rating (kN):19.4; B:11mm; Seals or Shields:Open Type; Limiting Speed Rating (r/min):5800; Cage Type:Steel; Static Load Rating (kN):16.3; SKU:16011 c3-timken; Clearance:C3; Availability:In Stock; |
| TIH 220M/LV Bearing Induction Heater | Seals or Shields:Open Type; Availability:In Stock; Static Load Rating (kN):115; Clearance:Standard; Weight:2.78 KGS; SKU:7219cyu/glp4-nachi; B:32mm; d:95mm; Dynamic Load Rating (kN):133; Grease Limiting Speed (r/min):8800; |
| CP34060 Thrust Plate 40x59.5x3mm | h:40.922 mm; Max. speed for Taconite seal:700 r/min; A1:120.65 mm; da:114.3 mm; P180°:72.5 kN; Housing:SSAFS 026 KA; Cap bolt:5/8-11 UNC; Taconite seal:TER 118; PG:1/4 NPT; H1:125.425 mm; |
| 99372 / CR99372 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:81800 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Static Radial Load Rating Co:73500 N; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Accessories:Shield & Seal; B:28.00 mm; d:110.000 mm; |
| AHX2320 Withdrawal Sleeve(matched Bearing:2320K, 22320EK, C2320K) | SKU:6311-2z/c3gjn-skf; Weight:0.02 KGS; Static Load Rating (kN):45; B:29mm; d:55mm; Seals or Shields:Two Metal Shields; Limiting Speed Rating (r/min):6300; Clearance:C3; Availability:In Stock; D:120mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
TRA1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x0.8mm Video