| No. | Brand | J | F | f | T | A | s | S | r |
| XC60 | - | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 2303-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 0.5mm | - | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 2-Way | - | - | - | - | - | - | - | - | - |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| DH650 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 96LED | - | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| CR99168 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Availability:In Stock; D:80mm; Preload:Light; Cage Type:Plastic; Dynamic Load Rating (kN):26; Oil Limiting Speed (r/min):27000; SKU:7010ctrv1vdulp3-nsk; Grease Limiting Speed (r/min):17700; B:16mm; |
| AOHX32/560 (232/560CAK/W33, 232/560CAK, 232/560CCK Bearing Withdrawal Sleeve) | Availability:In Stock; B:13mm; Dynamic Load Rating (kN):19.1; d:55mm; D:80mm; Weight:0.02 KGS; Seals or Shields:Open Type; Preload:Light; Grease Limiting Speed (r/min):17100; SKU:7911ctrdulp3-nsk; |
| CR99139 Stainless Steel Speedi Sleeve For Shaft Repair | d:50.000 mm; Basic Static Radial Load Rating Co:27000 N; Grease Speed Rating n1:6400 rpm; Oil Speed Rating n2:8300 rpm; Basic Dynamic Radial Load Rating C:33200 N; Fillet Radius rb:0.60 mm; D:90.0000 mm; B:20.00 mm; Fillet Radius ra:1.00 mm; |
| 99412 / CR99412 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Oil Limiting Speed (r/min):3000; B:50mm; Dynamic Load Rating (kN):201; Seals or Shields:Open Type; d:110mm; SKU:7322bmg-nsk; D:240mm; Weight:11.20 KGS; Grease Limiting Speed (r/min):2200; |
| 99352 / CR99352 Stainless Speedi Sleeve For Shaft Repair | d:50mm; D:90mm; Weight:0.02 KGS; B:30.2mm; Cage Type:Plastic; Availability:In Stock; Seals or Shields:Open Type; SKU:3210bnrtnc3-qbl; Clearance:C3; |
| CR99133 Stainless Steel Speedi Sleeve For Shaft Repair | H1:440 mm; N1:48 mm; Cap bolt, rec. tightening torque:850 N·m; Pa:2700 kN; P0°:8400 kN; Initial grease fill, 40%:17.5 kg; ATK:600 mm; Labyrinth seal:2 x TS 530; Eye bolt, size:2 x M 48; H:880 mm; |
| AH3036 Withdrawal Sleeve 170x180x92mm | r3,4 min.:1.5 mm; Design variant/feature:BC4.10/W33WI; Fatigue load limit Pu:1020 kN; Basic dynamic load rating C:5390 kN; r1,2 min.:10 mm; d:320 mm; Calculation factor kr:0; Basic static load rating C0:10800 kN; F:364 mm; α:20 °; |
| 86840 / CR86840 Stainless Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:3200 rpm; B:45.00 mm; Accessories:Seal & Snap-Ring; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.50 mm; D:200.0000 mm; Basic Static Radial Load Rating Co:118000 N; Oil Speed Rating n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3800 rpm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
TRA1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x0.8mm Video