| No. | Brand | J | F | f | T | A | s | S | r |
| 65ml-33g | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 9234004 | - | - | - | - | - | - | - | - | - |
| 960 | - | - | - | - | - | - | - | - | - |
| [5 | - | - | - | - | - | - | - | - | - |
| MI17412 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (LCC-1007) | - | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| SL192317 | - | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 35X80X21X28 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| 6320-2Z | SKF | - | - | - | - | - | - | - | - |
| AH3124 Withdrawal Sleeve 115x120x75mm | Fatigue Load Rating (kN):5.4; D:120mm; Static Load Rating (kN):90; Availability:In Stock; Weight:2.06 KGS; Clearance:Standard; d:55mm; Cage Type:Plastic; B:43mm; Dynamic Load Rating (kN):104; |
| AOH24060G(24060CCK30/W33, 24060CAK, 24060CCK, 24060CAK/W33, C4060K,C4060K30M Bearing Withdrawal Sleeve) | Cage Type:Steel; Availability:In Stock; Seals or Shields:Open Type; D:110mm; d:66.675mm; Static Load Rating (kN):125; B:22mm; Dynamic Load Rating (kN):98.9; SKU:395a/394a-timken; Weight:0.02 KGS; |
| HMV150E / HMV 150E Hydraulic Nut 752x912x94mm | Basic Static Radial Load Rating Co:12000 N; Basic Dynamic Radial Load Rating C:19000 N; Oil Speed Rating n2:16000 rpm; B:24.00 mm; Fillet Radius rb:0.30 mm; D:40.0000 mm; d:17.000 mm; Fillet Radius ra:0.64 mm; Grease Speed Rating n1:11000 rpm; |
| 85914 / CR85914 Stainless Speedi Sleeve For Shaft Repair | Basic static load rating C0:14300 kN; Limiting speed:800 r/min; r3,4 min.:7.5 mm; da max.:545 mm; Basic dynamic load rating C:7040 kN; K:12 mm; b:22.3 mm; Da max.:757 mm; D1 ≈:701 mm; s max.:12 mm; |
| CPR865115 Thrust Plate 65x115x8mm | Clearance:Standard; Static Load Rating (kN):40.4; Seals or Shields:Open Type; SKU:2mm208wicrsuh-timken; Availability:In Stock; B:18mm; D:80mm; Weight:0.35 KGS; d:40mm; Cage Type:Plastic; |
| TMDT 2-38 Wire Probe | Fatigue Load Rating (kN):6000; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; SKU:51117-fag; Cage Type:Steel; D:110mm; d:85mm; B:19mm; Dynamic Load Rating (kN):45.5; |
| 90766 / CR90766 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:lj3/4-zz-r&m; D:1.875 inch; Clearance:Standard; Availability:In Stock; d:0.75 inch; B:0.563 inch; |
| TRB2233 Thrust Bearing Ring / Thrust Needle Bearing Washer 34.925x52.375x1.6mm | D:62mm; Cage Type:Plastic; d:30mm; SKU:3206b-2rstnc3-qbl; Seals or Shields:Two Rubber Seals; Clearance:C3; Weight:0.02 KGS; Availability:In Stock; B:23.8mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TRE1018 Thrust Bearing Ring / Thrust Needle Bearing Washer 15.875x28.575x4mm Video