| No. | Brand | J | F | f | T | A | s | S | r |
| 2.0D | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 6209TB | fag | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 16X8 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 1000w | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | 15 mm | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| RW117 | Timken | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| 6063 | - | - | - | - | - | - | - | - | - |
| 625 | NTN | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| BM1 | - | - | - | - | - | - | - | - | - |
| 40X74X36 | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 1.11/16 | SKF | - | - | - | - | - | - | - | - |
| 3528SMD/SMD | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| HMV14E / HMV 14E Hydraulic Nut (M70x2)x135x43mm | B:25mm; Limiting Speed Rating (r/min):9000; Cage Type:Brass; Reference Speed Rating (r/min):9000; Weight:0.02 KGS; Fatigue Load Rating (kN):1.73; Static Load Rating (kN):40.5; SKU:7309becbm-skf; Clearance:Standard; Availability:In Stock; |
| TMDT 2-32 Insulated Surface Probe | D:420.0000 mm; Sealed Speed Rating n3:890 rpm; d:280.000 mm; Accessories:Two Seals; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1700 rpm; Basic Dynamic Radial Load Rating C:302000 N; Grease Speed Rating Open/Shielded n1:1400 rpm; Basic Static Radial Load Rating Co:405000 N; B:65.00 mm; |
| FTRA1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x1mm | SKU:22215-e1a-m-qbl; B:31mm; Seals or Shields:Open Type; Cage Type:Brass; d:75mm; Clearance:Standard; D:130mm; Weight:0.02 KGS; Availability:In Stock; |
| 86716 / CR86716 Stainless Speedi Sleeve For Shaft Repair | d:70.000 mm; Oil Speed Rating n2:5300 rpm; B:35.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:93000 N; |
| TMAS 50 Machinery Shim Kit | Cage Type:Steel; SKU:1316jc3-qbl; Seals or Shields:Open Type; Clearance:C3; Availability:In Stock; Weight:0.02 KGS; D:170mm; B:39mm; d:80mm; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
| 99587 / CR 99587 Stainless Speedi Sleeve For Shaft Repair | d:240mm; Static Load Rating (kN):1340; Reference Speed Rating (r/min):1600; Limiting Speed Rating (r/min):1300; Seals or Shields:Open Type; D:320mm; Cage Type:Brass; Dynamic Load Rating (kN):785; Weight:12.90 KGS; SKU:23948emw33c3-timken; |
| AH316 Withdrawal Sleeve (matched Bearing:2216EK, 1316K, 21316CCK, C2216K, C2216KV 22216EK) | Basic Dynamic Radial Load Rating C:130000 N; Oil Speed Rating n2:3400 rpm; d:90.000 mm; D:160.0000 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Accessories:No Shield, no Seal,; B:52.40 mm; Basic Static Radial Load Rating Co:120000 N; Grease Speed Rating n1:2400 rpm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TRD815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x3.2mm Video