| No. | Brand | J | F | f | T | A | s | S | r |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 9o-1b20-0223-0547-1 | - | - | - | - | - | - | - | - | - |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| Catsbs80 | - | - | - | - | - | - | - | - | - |
| 50 | John Deere | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| 07433-71103,07432-71201,07430-72201,07432-72101,07440-72202,07432-71203,07436-72202,07443-6710 | - | - | - | - | - | - | - | - | - |
| (DSM-14T) | - | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| A4VG | Rexroth | - | - | - | - | - | - | - | - |
| 5.4L | - | - | - | - | - | - | - | - | - |
| 7317BYG | SKF | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| (CC24SC, | INA | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| MF85ZZ | - | - | - | - | - | - | - | - | - |
| R0632-025-00 | Rexroth | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| HMV54E / HMV 54E Hydraulic Nut 272x368x57mm | Grease Speed Rating Open/Shielded n1:850 rpm; Fillet Radius ra:2.50 mm; d:480.000 mm; B:56.00 mm; Basic Dynamic Radial Load Rating C:325000 N; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:1000 rpm; Accessories:Two Seals; D:600.0000 mm; Basic Static Radial Load Rating Co:560000 N; |
| 87921 / CR87921 Stainless Speedi Sleeve For Shaft Repair | Weight:9.00 KGS; Availability:In Stock; Reference Speed Rating (r/min):3200; Dynamic Load Rating (kN):647; Seals or Shields:Open Type; D:215mm; Clearance:C3; Limiting Speed Rating (r/min):2600; d:120mm; B:58mm; |
| FTRC6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x2mm | Dynamic Load Rating (kN):250; Availability:In Stock; Seals or Shields:Open Type; Grease Limiting Speed (r/min):3000; Weight:2.54 KGS; SKU:22217eake4c3-nsk; B:36mm; D:150mm; Static Load Rating (kN):325; Cage Type:Steel; |
| CR99163 Stainless Steel Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:3400 rpm; D:130.0000 mm; Oil Speed Rating n2:4500 rpm; d:60.000 mm; Sealed Speed Rating n3:3400 rpm; Basic Static Radial Load Rating Co:143000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:134000 N; B:57.20 mm; Accessories:No Shield, no Seal; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| TRD4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x3.2mm | Dynamic Load Rating (kN):27.3; B:16mm; D:100mm; SKU:3mm9314wicrduh-timke; Clearance:Standard; Static Load Rating (kN):30.2; Availability:In Stock; Seals or Shields:Open Type; Speed Rating (r/min):11800; Weight:0.34 KGS; |
| 90766 / CR90766 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:lj3/4-zz-r&m; D:1.875 inch; Clearance:Standard; Availability:In Stock; d:0.75 inch; B:0.563 inch; |
| TRA3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x0.8mm | Clearance:C3; Static Load Rating (kN):1.95; D:26mm; B:8mm; SKU:629-c-2hrs-c3-fag; Dynamic Load Rating (kN):4.85; Limiting Speed Rating (r/min):19000; Fatigue Load Rating (kN):0.099; Weight:0.02 KGS; Seals or Shields:Two Rubber Seals; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
TRE815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x4mm Video