| No. | Brand | J | F | f | T | A | s | S | r |
| 6315-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| PC400-6 | - | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| L7054380253 | Parker | - | - | - | - | - | - | - | - |
| 94A | - | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| Catsbs80 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| sl045030-pp-2nr | INA | - | - | - | - | - | - | - | - |
| Ba180-a | - | - | - | - | - | - | - | - | - |
| 30mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| AHX2320 Withdrawal Sleeve(matched Bearing:2320K, 22320EK, C2320K) | SKU:6311-2z/c3gjn-skf; Weight:0.02 KGS; Static Load Rating (kN):45; B:29mm; d:55mm; Seals or Shields:Two Metal Shields; Limiting Speed Rating (r/min):6300; Clearance:C3; Availability:In Stock; D:120mm; |
| AOH3056(23056CCK/W33, C3056K,23056CAK, 23056CCK Bearing Withdrawal Sleeve) | SKU:2mm9100wicrsuh-timke; D:26mm; Availability:In Stock; Dynamic Load Rating (kN):2.2; Static Load Rating (kN):5.4; B:8mm; Cage Type:Plastic; Clearance:Standard; d:10mm; Seals or Shields:Open Type; |
| TRD6074 Thrust Bearing Ring / Thrust Needle Bearing Washer 95.25x117.475x3.2mm | Speed Rating (r/min):8800; Availability:In Stock; d:95mm; B:18mm; Weight:0.60 KGS; Dynamic Load Rating (kN):44.2; D:130mm; Seals or Shields:Open Type; SKU:3mm9319wicrsul-timke; Cage Type:Plastic; |
| CR150X180X15 HMSA10RG Shaft Oil Seal 150x180x15mm | SKU:ams5-skf; B:0.625 Inch; Availability:In Stock; Weight:0.02 KGS; D:1.813 Inch; Clearance:Standard; d:0.625 Inch; Seals or Shields:Open Type; |
| TLGH 1 Grease Gun | Mass adapter sleeve assembly:0.64 kg; Sleeve:S 13x2.3/16; Lock nut:N 13; B:14.554 mm; G:64.719 mm; B4:15.9 mm; d:65 mm; B1:53.086 mm; Lock washer:W 13; d1:55.563 mm; |
| 86269 / CR86269 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.71; Reference Speed Rating (r/min):8500; Cage Type:Plastic; d:60mm; Weight:0.89 KGS; Availability:In Stock; Dynamic Load Rating (kN):30.5; Limiting Speed Rating (r/min):6700; Clearance:C3; B:22mm; |
| HMV10 / HMV 10 Hydraulic Nut (M50x1.5)x114x42mm | SKU:22207-e1-c3-fag; Fatigue Load Rating (kN):9.4; Weight:0.02 KGS; B:23mm; d:35mm; Clearance:C3; Seals or Shields:Open Type; Cage Type:Steel; Reference Speed Rating (r/min):7000; D:72mm; |
| HMV134E / HMV 134E Hydraulic Nut 672x826x90mm | h:212.5 mm; Tolerance shaft:e7; Mass bushing:12.2 kg; Specific dynamic load factor K:25 N/mm²; Permissible sliding velocity v max.:0.5 m/s; d:210 mm; Coefficient of friction µ min.:0.08; Tolerance housing:H7; a:10 mm; B:200 mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
TRD613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x3.2mm Video