| No. | Brand | J | F | f | T | A | s | S | r |
| PV020, | Parker | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 7211BTVR | fag | - | - | - | - | - | - | - | - |
| 5PCS | - | - | - | - | - | - | - | - | - |
| LM5050-WN30-12V | - | - | - | - | - | - | - | - | - |
| NP300 | - | - | - | - | - | - | - | - | - |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 100M | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 3800 | - | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 52pcs | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| HMV12E / HMV 12E Hydraulic Nut (M60x2)x125x43mm | Seals or Shields:Open Type; Clearance:Standard; B:52.4mm; Cage Type:Steel; SKU:23218cck/w33-qbl; Availability:In Stock; D:160mm; Weight:0.02 KGS; d:90mm; |
| 99312 / CR99312 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):3000; Seals or Shields:Open Type; Static Load Rating (kN):800; B:60mm; Availability:In Stock; D:240mm; Clearance:Standard; Reference Speed Rating (r/min):2400; Weight:0.02 KGS; Fatigue Load Rating (kN):83; |
| FTRB6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x1.5mm | B:46mm; Cage Type:Brass; d:100mm; D:180mm; Seals or Shields:Open Type; Weight:0.02 KGS; Clearance:Standard; SKU:22220-e1a-m-qbl; Availability:In Stock; |
| TMST 3 Electronic Stethoscope | F:10 mm; B:10 mm; r, r1,2 min.:0.3 mm; Mass inner ring:0.0037 kg; d:6 mm; |
| ZM40 Precision Locknut (M40x1.5)x58x14mm | Static Load Rating (kN):6.6; SKU:2207-2rstn-nsk; Grease Limiting Speed (r/min):8500; D:72mm; d:35mm; Dynamic Load Rating (kN):21.7; Weight:0.02 KGS; Cage Type:Plastic; Oil Limiting Speed (r/min):10000; Availability:In Stock; |
| CR99267 Stainless Steel Speedi Sleeve For Shaft Repair | B:38.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:3100 rpm; Grease Speed Rating Open/Shielded n1:2500 rpm; Basic Dynamic Radial Load Rating C:154000 N; d:110.000 mm; D:200.0000 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:170000 N; |
| 85800 / CR85800 Stainless Speedi Sleeve For Shaft Repair | SKU:23220cke4c3-nsk; Seals or Shields:Open Type; d:100mm; Cage Type:Steel; Grease Limiting Speed (r/min):1600; Availability:In Stock; Static Load Rating (kN):605; Oil Limiting Speed (r/min):2200; Weight:6.60 KGS; Dynamic Load Rating (kN):420; |
| AOH24180(24180ECCK30/W33, 24180CCK, 24180CAK Bearing Withdrawal Sleeve) | Clearance:Standard; Weight:0.20 KGS; D:3.313 inch; d:2 inch; B:0.625 inch; Seals or Shields:Open Type; SKU:xlj2-r&m; Availability:In Stock; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
87777 / CR87777 Stainless Speedi Sleeve For Shaft Repair Video