| No. | Brand | J | F | f | T | A | s | S | r |
| 25909 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| GK45DO | - | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| NNF5009-2LSNV | - | - | 108 mm | - | - | - | - | - | - |
| L-4517 | - | - | - | - | - | - | - | - | - |
| TC2011 | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 4WE10D32/OFCW110N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| KMX15RA | INA | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 21411884 | - | - | - | - | - | - | - | - | - |
| N3058 | - | - | - | - | - | - | - | - | - |
| 5.8g | - | - | - | - | - | - | - | - | - |
| TMEB 2 Belt Alignment Tool | B:12mm; Grease Limiting Speed (r/min):20000; D:62mm; Availability:In Stock; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.36; Cage Type:Plastic; Dynamic Load Rating (kN):12.4; Oil Limiting Speed (r/min):34000; Static Load Rating (kN):8.5; |
| 90761 / CR90761 Stainless Speedi Sleeve For Shaft Repair | d:17mm; Static Load Rating (kN):6.6; B:14mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):10.4; Weight:0.12 KGS; Limiting Speed Rating (r/min):9700; Fatigue Load Rating (kN):0.335; Clearance:Standard; SKU:s6303-2rsr-fag; |
| 4.331 Inch | 110 Millimeter x 4.724 Inch | 120 Millimeter x 1.181 Inch | 30 Millimeter 89997 / CR89997 Stainless Speedi Sleeve For Shaft Repair | Basic Static Radial Load Rating Co:9500 N; B:15.00 mm; Basic Dynamic Radial Load Rating C:18600 N; D:52.0000 mm; Oil Speed Rating n2:16000 rpm; Grease Speed Rating n1:11000 rpm; Fillet Radius ra:1.00 mm; d:20.000 mm; Size (mm):4.331 Inch | 110 Millimeter x 4.724 Inch | 120 Millimeter x 1.181 Inch | 30 Millimeter ; |
| CR99843 Stainless Steel Speedi Sleeve For Shaft Repair | D:130mm; Availability:In Stock; SKU:22215-e1a-k-m-c3-qbl; Weight:0.02 KGS; Seals or Shields:Open Type; d:75mm; B:31mm; Cage Type:Brass; Clearance:C3; |
| 89948 / CR89948 Stainless Speedi Sleeve For Shaft Repair | d:55mm; Weight:0.71 KGS; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.54; Clearance:C3; Reference Speed Rating (r/min):14000; Limiting Speed Rating (r/min):9000; Cage Type:Plastic; SKU:1211ektn9/c3w64-skf; Availability:In Stock; |
| TKSA 20 Shaft Alignment Tool | Availability:In Stock; SKU:2mm220wicrdum-timken; Dynamic Load Rating (kN):126.8; Clearance:Standard; d:100mm; D:180mm; B:34mm; Cage Type:Plastic; Seals or Shields:Open Type; Static Load Rating (kN):165.2; |
| 84390 / CR84390 Stainless Speedi Sleeve For Shaft Repair | End plug (suffix Y):X-5217-4; P120°:207 kN; Taconite seal:TER 552; ba:89.694 mm; Housing:SAFS 048 KA; A1:203.2 mm; H1:209.55 mm; h:56.356 mm; Cap bolt, SAE grade:8; Da:359.999 mm; |
| FTRD6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x2.5mm | Basic dynamic load rating C:11000 kN; F:572.3 mm; Calculation factor kr:730; C:540 mm; Fatigue load limit Pu:2160 kN; D1 ≈:659 mm; d:485 mm; b:22.3 mm; Mass bearing:830 kg; K:12 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
84590 / CR84590 Stainless Speedi Sleeve For Shaft Repair Video