| No. | Brand | J | F | f | T | A | s | S | r |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| (6315) | Timken | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 2p | - | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| 478362 | - | - | - | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| PC200-5 | - | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| (10 | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| 60W | - | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| 1.2 | - | - | - | - | - | - | - | - | - |
| 7956 | - | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 008BC | - | - | - | - | - | - | - | - | - |
| 99799 / CR99799 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; SKU:7410bgam-skf; D:130mm; Dynamic Load Rating (kN):95.6; B:31mm; Fatigue Load Rating (kN):2.7; Cage Type:Brass; Reference Speed Rating (r/min):6300; Availability:In Stock; Static Load Rating (kN):64; |
| 84641 / CR84641 Stainless Speedi Sleeve For Shaft Repair | B:74.00 mm; D:620.0000 mm; Basic Dynamic Radial Load Rating C:423000 N; Fillet Radius ra:4.00 mm; Basic Static Radial Load Rating Co:750000 N; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:1000 rpm; Sealed Speed Rating n3:550 rpm; d:460.000 mm; Grease Speed Rating Open/Shielded n1:850 rpm; |
| CP1.56590 Thrust Plate 65x89.3x1.5mm | D:260.0000 mm; Grease Speed Rating n1:2500 rpm; d:120.000 mm; Oil Speed Rating n2:3200 rpm; Basic Dynamic Radial Load Rating C:260000 N; Basic Static Radial Load Rating Co:275000 N; Fillet Radius rb:1.00 mm; B:55.00 mm; Fillet Radius ra:2.50 mm; |
| 3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter CR99062 Stainless Steel Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):44000; D:16mm; B:5mm; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):1.7; Weight:0.00 KGS; Clearance:Standard; Cage Type:Steel; d:5mm; Static Load Rating (kN):0.67; Size (mm):3.937 Inch | 100 Millimeter x 7.087 Inch | 180 Millimeter x 1.811 Inch | 46 Millimeter ; |
| TRA411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x0.8mm | Clearance:C3; d:60mm; SKU:22312ek/c3-qbl; Weight:0.02 KGS; Availability:In Stock; Seals or Shields:Open Type; D:130mm; Cage Type:Steel; B:46mm; |
| FTRC1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x2mm | Clearance:C3; Cage Type:Plastic; Availability:In Stock; d:30mm; B:27mm; SKU:2306tnc3-qbl; D:72mm; Weight:0.02 KGS; Seals or Shields:Open Type; |
| AOH24164(24164CAK, 24164CCK, 24164CAK30/W33, 24164CCK30/W33 Bearing Withdrawal Sleeve) | End plug (suffix Y):EPR 21; h:47.625 mm; A1:158.75 mm; PosiTrac Plus contact element:2 x B10724-155; N1:28.575 mm; Pa:40 kN; P120°:85.9 kN; L:558.8 mm; ba:69.85 mm; J max.:488.95 mm; |
| 99326 / CR99326 Stainless Speedi Sleeve For Shaft Repair | B:22mm; Dynamic Load Rating (kN):62.4; Preload:Light; Seals or Shields:Open Type; Static Load Rating (kN):58.5; Fatigue Load Rating (kN):2.45; Grease Limiting Speed (r/min):9500; d:80mm; D:125mm; Availability:In Stock; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
85654 / CR85654 Stainless Speedi Sleeve For Shaft Repair Video