| No. | Brand | J | F | f | T | A | s | S | r |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 6900 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| K89315-TV | INA | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| Xk6140 | - | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| T73T-1217 | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 7211BTVR | fag | - | - | - | - | - | - | - | - |
| 2004 | Dodge | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| R450-7 | - | - | - | - | - | - | - | - | - |
| 19 | - | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| HMV70E / HMV 70E Hydraulic Nut 352x464x66mm | d:670 mm; Mass withdrawal sleeve:185 kg; B2:478 mm; B1:452 mm; G:Tr 710x7; Hydraulic nut:HMV 142 E; G2:G 1/4; A:12 mm; G1:40 mm; Nut for removal:HM 31/710; |
| AHX3040 Withdrawal Sleeve 190x200x102mm | Static Load Rating (kN):6.5; Cage Type:Steel; B:18mm; SKU:1208j-nsk; d:40mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):19.3; Oil Limiting Speed (r/min):9000; Availability:In Stock; Weight:0.02 KGS; |
| CR170x200x15HMSA10 V Shaft Oil Seal 170x200x15mm | SKU:24048cck30/c3w33-skf; Clearance:C3; Dynamic Load Rating (kN):1600; D:360mm; Fatigue Load Rating (kN):228; d:240mm; Static Load Rating (kN):2700; Seals or Shields:Open Type; Weight:0.02 KGS; Reference Speed Rating (r/min):1100; |
| 84094 / CR84094 Stainless Speedi Sleeve For Shaft Repair | D:150mm; Clearance:Standard; B:51mm; Weight:0.02 KGS; Cage Type:Steel; Availability:In Stock; SKU:22314e-qbl; d:70mm; Seals or Shields:Open Type; |
| TRE815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x4mm | D1 ≈:619 mm; B:100 mm; Da max.:652 mm; Mass bearing:107 kg; ra max.:4 mm; da min.:518 mm; Fatigue load limit Pu:355 kN; Limiting speed:1200 r/min; Axial load factor Y:0.4; Basic dynamic load rating C:2050 kN; |
| ZM125 Precision Locknut (M125x2)x160x24mm | d:90mm; Availability:In Stock; SKU:6018tbr12p4-rhp; Cage Type:Plastic; Dynamic Load Rating (kN):58.2; Weight:0.20 KGS; B:24mm; Clearance:Standard; D:140mm; Grease Limiting Speed (r/min):8700; |
| AOH3084G(23084CAK/W33, C3084KM, 23084CAK, 23084CCK Bearing Withdrawal Sleeve | Basic static load rating C0:360 kN; Specific dynamic load factor K:100 N/mm²; α:6 °; G:M 60x4; l7 min.:73 mm; h:225 mm; d2 max.:137 mm; d:60 mm; Mass rod end:6.25 kg; l1 min.:120 mm; |
| TMDT 2-35 Sharp Tip Probe | Seals or Shields:Open Type; Clearance:Standard; Cage Type:Steel; Availability:In Stock; B:53mm; d:110mm; SKU:22222-e1-qbl; Weight:0.02 KGS; D:200mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
87785 / CR87785 Stainless Speedi Sleeve For Shaft Repair Video