| No. | Brand | J | F | f | T | A | s | S | r |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| W208PP | FAFNIR | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| SZR660 | - | - | - | - | - | - | - | - | - |
| 6003 | - | - | - | - | - | - | - | - | - |
| 7317BYG | SKF | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 201 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| (BDZ-155-A(ZA-2)) | - | - | - | - | - | - | - | - | - |
| CL2B-DA04B | - | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| 7017CD/P4A | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 6m | - | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| AH3132G Withdrawal Sleeve(matched Bearing:23132CCK/W33, 22232CCK/W33, C3132K) | Weight:0.20 KGS; B:6mm; Availability:In Stock; Cage Type:Steel; D:17mm; SKU:s689-2zw6-zen; Seals or Shields:Two Metal Shields; Clearance:Standard; d:9mm; |
| WR55 Snap Ring 52.6x55x1.5mm | Static Load Rating (kN):3.69; Cage Type:Plastic; d:12mm; D:24mm; Dynamic Load Rating (kN):1.84; Speed Rating (r/min):67200; Clearance:Standard; Weight:0.01 KGS; SKU:2mm9301wicrsuh-timke; Availability:In Stock; |
| CR99149 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor Y:1.4; Basic dynamic load rating C:1720 kN; r1,2 min.:5 mm; Dimension series:4GD; a:95.132 mm; Basic static load rating C0:2700 kN; Calculation factor e:0.43; db min.:240.5 mm; Mass bearing:59.7 kg; D:400 mm; |
| AHX3030 Withdrawal Sleeve(matched Bearing:23030CCK/W33, C3030KMB) | Dynamic Load Rating (kN):38.5; Cage Type:Plastic; SKU:1309ktnc3-nsk; d:45mm; Grease Limiting Speed (r/min):6000; D:100mm; Static Load Rating (kN):12.7; Availability:In Stock; Clearance:C3; B:25mm; |
| HMV90E / HMV 90E Hydraulic Nut 452x580x76mm | D:12mm; d:6mm; Cage Type:Steel; Weight:0.20 KGS; B:4mm; SKU:smr126-2z-zen; Seals or Shields:Two Metal Shields; Availability:In Stock; Clearance:Standard; |
| AOH24088 (24088ECAK30/W33, 24088CAK, 24088CCK Bearing Withdrawal Sleeve | RG:1/4-28 UNF; Thread grub screw G2:M6; Bearing:YSPAG 207-107; Limiting speed:1100 r/min; Db1:87 mm; Recommended tightening torque for grub screw:7.4 N·m; L:118 mm; End cover:ECY 207; Basic dynamic load rating C:25.5 kN; A:34.5 mm; |
| 85123 / CR85123 Stainless Speedi Sleeve For Shaft Repair | B:19mm; Clearance:Standard; Availability:In Stock; D:68mm; Seals or Shields:Open Type; Cage Type:Steel; SKU:51208-qbl; Weight:0.28 KGS; d:40mm; |
| TRB4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x1.6mm | D:80mm; B:34.9mm; SKU:3307bnrtnc3-nsk; Static Load Rating (kN):33200; d:35mm; Seals or Shields:Open Type; Weight:0.82 KGS; Cage Type:Plastic; Dynamic Load Rating (kN):51200; Oil Limiting Speed (r/min):6500; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
86716 / CR86716 Stainless Speedi Sleeve For Shaft Repair Video