| No. | Brand | J | F | f | T | A | s | S | r |
| 25420 | - | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| 3/8-16 | - | - | - | - | - | - | - | - | - |
| 4x8x3 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| 12feet | - | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| 70x100x16 | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 92045-1396 | - | - | - | - | - | - | - | - | - |
| F6800ZZ | - | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| (F01,F02,F04,F06,F07,F10,F13) | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| 90/600 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 99331 / CR99331 Stainless Speedi Sleeve For Shaft Repair | d:35.000 mm; Sealed Speed Rating n3:5600 rpm; Accessories:One Seal; B:38.10 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:49400 N; Basic Static Radial Load Rating Co:34500 N; D:80.0000 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.50 mm; |
| FTRB2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x1.5mm | Basic dynamic load rating C:605 kN; Reference speed:1100 r/min; D:400 mm; B:80 mm; d:320 mm; Mass bearing:23 kg; da min.:331 mm; ra max.:2 mm; Limiting speed:1200 r/min; F:350 mm; |
| AH3122 Withdrawal Sleeve 105x110x68mm | S:4.763 mm; Labyrinth ring:2 x LOR 584; Bearing:22244 CCK/W33; Bearing limiting speed:2000 r/min; End plug (suffix Y):EPR 23; Adapter sleeve assembly:SNW 44x7.1/2; Initial grease fill:2749.95 g; Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:4284.4 N·m; P150°:236 kN; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
| AHX2324G Withdrawal Sleeve(matched Bearing:22324CCK/W33) | Static Load Rating (kN):1480; D:280mm; Dynamic Load Rating (kN):1020; Cage Type:Brass; d:180mm; SKU:23036kemw33-timken; Seals or Shields:Open Type; Availability:In Stock; Reference Speed Rating (r/min):2000; Weight:16.80 KGS; |
| FTRD100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x2.5mm | Oil Limiting Speed (r/min):8000; Seals or Shields:Two Metal Shields; Cage Type:Plastic; Dynamic Load Rating (kN):39; Clearance:C3; Grease Limiting Speed (r/min):6300; B:27mm; D:72mm; Static Load Rating (kN):28.7; d:35mm; |
| TRD512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x3.2mm | SKU:qj211ma-skf; Cage Type:Brass; Fatigue Load Rating (kN):3.55; Weight:0.77 KGS; Limiting Speed Rating (r/min):11000; D:100mm; Reference Speed Rating (r/min):8000; Dynamic Load Rating (kN):85; Clearance:Standard; Seals or Shields:Open Type; |
| TMDT 2-42 Ambient Temperature Probe | B:400.05 mm; D1 ≈:484 mm; Calculation factor Y0:2; d1 ≈:419 mm; Basic dynamic load rating C:6440 kN; Design variant/feature:TQO/GWI; Calculation factor Y2:3; Calculation factor e:0.33; r1,2 min.:3.3 mm; T:400.05 mm; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
86631 / CR86631 Stainless Speedi Sleeve For Shaft Repair Video