| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| 250 | - | - | - | - | - | 9 mm | - | - | - |
| 21310 | fag | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| Lt110 | - | - | - | - | - | - | - | - | - |
| (5pcs) | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| 46% | - | - | - | - | - | - | - | - | - |
| NA4914 | INA | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| PS411155ACP | Parker | - | - | - | - | - | - | - | - |
| 606ZZ | - | - | - | - | - | - | - | - | - |
| C500S | - | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| FTRE85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x3mm | SKU:22217ek/c4-qbl; d:85mm; Cage Type:Steel; Seals or Shields:Open Type; D:150mm; Weight:0.02 KGS; B:36mm; Availability:In Stock; Clearance:C4; |
| ZM45 Precision Locknut (M45x1.5)x65x14mm | SKU:7216acdgb/p4a-skf; Seals or Shields:Open Type; Fatigue Load Rating (kN):2.9; Dynamic Load Rating (kN):81.9; Oil Limiting Speed (r/min):14000; B:26mm; Cage Type:Plastic; Clearance:Standard; Weight:1.45 KGS; Grease Limiting Speed (r/min):8500; |
| 729659 C/110V Electric Hot Plate | Basic Static Radial Load Rating Co:180000 N; Oil Speed Rating n2:2800 rpm; Accessories:Two Shields; B:65.10 mm; Fillet Radius ra:2.00 mm; d:105.000 mm; Grease Speed Rating n1:1800 rpm; D:190.0000 mm; Sealed Speed Rating n3:1800 rpm; Basic Dynamic Radial Load Rating C:186000 N; |
| AH230 Withdrawal Sleeve 145x150x60mm | d:95mm; Seals or Shields:Open Type; Clearance:Standard; SKU:22319-e1-qbl; D:200mm; Cage Type:Steel; Weight:0.02 KGS; B:67mm; Availability:In Stock; |
| 46X68X8 CRW1 R Oil Seal 46x68x8mm | Availability:In Stock; SKU:23122cke4-nsk; d:110mm; Seals or Shields:Open Type; Cage Type:Steel; B:56mm; D:180mm; Dynamic Load Rating (kN):385; Clearance:Standard; Grease Limiting Speed (r/min):1600; |
| HMV22E / HMV 22E Hydraulic Nut (M110x2)x178x44mm | d:80mm; Weight:0.02 KGS; D:140mm; Reference Speed Rating (r/min):5300; Cage Type:Plastic; Limiting Speed Rating (r/min):5300; B:26mm; SKU:7216bep-skf; Static Load Rating (kN):69.5; Seals or Shields:Open Type; |
| CR99050 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):7.85; Availability:In Stock; Preload:Light; D:47mm; Clearance:Standard; Seals or Shields:Open Type; B:9mm; Oil Limiting Speed (r/min):39000; Weight:0.02 KGS; Static Load Rating (kN):5.95; |
| AOH24152(24152CCK30/W33, 24152CCK, 24152CAK Bearing Withdrawal Sleeve) | B:43mm; Clearance:C3; SKU:22311ek/c3-skf; Fatigue Load Rating (kN):30; Weight:0.02 KGS; d:55mm; Reference Speed Rating (r/min):4300; Seals or Shields:Open Type; Static Load Rating (kN):280; Dynamic Load Rating (kN):270; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
90774 / CR90774 Stainless Speedi Sleeve For Shaft Repair Video