| No. | Brand | J | F | f | T | A | s | S | r |
| IP20/IP44/IP67 | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| Lt110 | - | - | - | - | - | - | - | - | - |
| 1.5-2.5t/H | - | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| (10-5-10) | - | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| 1985-1987 | koyo | - | - | - | - | - | - | - | - |
| 6015 | koyo | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - | - |
| CL2B-KA168-2 | - | - | - | - | - | - | - | 4.763 mm | - |
| 2 | Parker | - | - | - | - | - | - | - | - |
| 36*1W | - | - | - | - | - | - | - | - | - |
| AS90120 Thrust Needle Roller Bearing Washer 90x120x1mm | Lock washer / Locking clip:MS 30/600-530; b:40 mm; Associated spanner:TMFN 500-600; d3:630 mm; d2:558 mm; Mass lock nut:45.8 kg; d1:590 mm; G:Tr 530x6; B5:90 mm; h:20 mm; |
| AH3120 Withdrawal Sleeve 95x100x64mm | Clearance:Standard; SKU:np326808/np806712-ti; B:22.5mm; d:27mm; Cage Type:Steel; Weight:0.17 KGS; D:62mm; Seals or Shields:Open Type; Availability:In Stock; |
| 86716 / CR86716 Stainless Speedi Sleeve For Shaft Repair | d:70.000 mm; Oil Speed Rating n2:5300 rpm; B:35.00 mm; Basic Dynamic Radial Load Rating C:121000 N; Fillet Radius rb:1.00 mm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Grease Speed Rating n1:4500 rpm; Basic Static Radial Load Rating Co:93000 N; |
| CP2744 Thrust Plate 27x43.7x0.8mm | Cage Type:Plastic; d:40mm; SKU:7008ctrsulp3-nsk; Oil Limiting Speed (r/min):32500; B:15mm; Dynamic Load Rating (kN):20.6; Static Load Rating (kN):15.9; Grease Limiting Speed (r/min):21300; Weight:0.02 KGS; D:68mm; |
| CMAK 600-EN Bearing Analysis Kit | Clearance:Standard; Grease Limiting Speed (r/min):3300; Static Load Rating (kN):345; Weight:0.02 KGS; d:260mm; Oil Limiting Speed (r/min):4900; Cage Type:Plastic; Seals or Shields:Open Type; Preload:Light; D:360mm; |
| TRD3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x3.2mm | H1:125 mm; Adapter sleeve:H 322 E; da:100 mm; P90°:410 kN; Appropriate attachment bolt, rec. tightening torque:665 N·m; Locating ring:2 x FRB 13,5/200; Pa:220 kN; N1:26 mm; Q120°:620 kN; Cap bolt, rec. tightening torque:200 N·m; |
| Spherical Roller Bearings 22208KEJW33 40x80x23mm | SKU:6230c3-nsk; d:150mm; Availability:In Stock; Cage Type:Steel; Clearance:C3; Dynamic Load Rating (kN):176; Grease Limiting Speed (r/min):2000; Seals or Shields:Open Type; Static Load Rating (kN):168; D:270mm; |
| 86413 / CR86413 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:41000 N; Oil Speed Rating Open/Shielded n2:7000 rpm; Sealed Speed Rating n3:3600 rpm; d:70.000 mm; D:110.0000 mm; Accessories:Without Accessories; B:20.00 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:6000 rpm; Basic Static Radial Load Rating Co:32500 N; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
85762 / CR85762 Stainless Speedi Sleeve For Shaft Repair Video