| No. | Brand | J | F | f | T | A | s | S | r |
| 12 | - | - | - | - | - | - | - | - | - |
| VCL6P65A | Parker | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| r155.88 | - | - | - | - | - | - | - | - | - |
| SH30C2QZUU1000L | thk | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| HK1015 | - | - | - | - | - | - | - | - | - |
| Dh200 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 16mm | - | - | - | - | - | - | - | - | - |
| MB5209XP | - | - | - | - | - | - | - | - | - |
| AHX2318 Withdrawal Sleeve(matched Bearing:2318K, 22318EK, C2318K) | B:90 mm; C:88 mm; H max.:47.5 mm; r min.:2 mm; D:165 mm; K:8 mm; Mass bearing:11.2 kg; Fatigue load limit Pu:52 kN; d1 ≈:106.65 mm; D1 ≈:107 mm; |
| 87817 / CR87817 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):1.6; Preload:Light; d:10mm; Cage Type:Plastic; Oil Limiting Speed (r/min):100000; Fatigue Load Rating (kN):0.067; Weight:0.02 KGS; SKU:7000acdga/p4a-skf; Availability:In Stock; Dynamic Load Rating (kN):3.97; |
| AH3238G Withdrawal Sleeve(matched Bearing:23238CAK/W33, 23238CCK/W33) | Dynamic Load Rating (kN):315; Availability:In Stock; Weight:4.11 KGS; d:120mm; B:46mm; D:180mm; Cage Type:Steel; Grease Limiting Speed (r/min):1800; SKU:23024cdke4-nsk; Static Load Rating (kN):525; |
| TMDT 2-39 High Temperature Wire Probe | Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:C3; B:43mm; d:55mm; Cage Type:Plastic; Availability:In Stock; D:120mm; SKU:2311tnc3-qbl; |
| AH3236G Withdrawal Sleeve(matched Bearing:23236CAK,23236CCK,23236CCK/W33, C3236K) | SKU:1205j-qbl; d:25mm; Availability:In Stock; Seals or Shields:Open Type; Weight:0.02 KGS; D:52mm; B:15mm; Cage Type:Steel; Clearance:Standard; |
| TMTP 200 General Purpose Thermometer | Availability:In Stock; SKU:23068embw507w84c08-t; Limiting Speed Rating (r/min):800; Reference Speed Rating (r/min):930; d:340mm; D:520mm; Weight:102.70 KGS; Dynamic Load Rating (kN):2890; Seals or Shields:Open Type; B:133mm; |
| TRB916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x1.6mm | Accessories:Two Seals; d:65.000 mm; Oil Speed Rating n2:4300 rpm; Basic Static Radial Load Rating Co:163000 N; Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; D:140.0000 mm; B:58.70 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; |
| AH3032 Withdrawal Sleeve 150x160x77mm | D:80mm; d:25mm; Dynamic Load Rating (kN):35.8; Static Load Rating (kN):19.3; Weight:0.12 KGS; Reference Speed Rating (r/min):20000; B:21mm; Limiting Speed Rating (r/min):13000; Clearance:Standard; Availability:In Stock; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
87634 / CR87634 Stainless Speedi Sleeve For Shaft Repair Video