| No. | Brand | J | F | f | T | A | s | S | r |
| 7007CSN24TRV1VS-01 | NSK | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2-Way | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| C6908V | - | - | - | - | - | - | - | - | - |
| 7211BTVR | fag | - | - | - | - | - | - | - | - |
| 99002 | - | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 1lb | - | - | - | - | - | - | - | - | - |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| AOH240/1060 (240/1060CAK, 240/1060CCK, 240/1060CCK/W33, 240/1060CAK30F/W33 Bearing Withdrawal Sleeve) | Fillet Radius ra:1.00 mm; d:17.000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:12700 N; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:21600 N; Oil Speed Rating n2:14000 rpm; Sealed Speed Rating n3:11000 rpm; D:47.0000 mm; B:22.20 mm; |
| AH24126 Withdrawal Sleeve(matched Bearing:24126CCK/W33, C4126K30) | d:30mm; Availability:In Stock; Weight:0.11 KGS; Static Load Rating (kN):16.8; Speed Rating (r/min):25500; SKU:2mm9106wicrsuh-timke; Clearance:Standard; Dynamic Load Rating (kN):10.3; Cage Type:Plastic; B:13mm; |
| HMV11E / HMV 11E Hydraulic Nut (M55x2)x120x42mm | s:41.275 mm; J:273.05 mm; Mass bearing unit:24 kg; L:320.278 mm; A3:36.513 mm; A6:28.575 mm; B:116.681 mm; S:0.794 mm; A5:46.831 mm; Limiting speed:700 r/min; |
| 87379 / CR87379 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):125; SKU:51222-skf; Weight:2.40 KGS; Static Load Rating (kN):365; Limiting Speed Rating (r/min):2400; D:160mm; Clearance:Standard; d:110mm; Minimum Load Factor:0.79; Seals or Shields:Open Type; |
| CR99166 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; SKU:3205a-2rs1/mt33-skf; Availability:In Stock; d:25mm; Weight:0.02 KGS; Cage Type:Steel; D:52mm; Static Load Rating (kN):14.3; Fatigue Load Rating (kN):0.6; B:20.6mm; |
| 10 mm x 30 mm x 9 mm TRE1220 Thrust Bearing Ring / Thrust Needle Bearing Washer 19.05x31.75x4mm | Dynamic Load Rating (kN):67.4; B:20mm; Seals or Shields:Open Type; D:62mm; Limiting Speed Rating (r/min):7800; Reference Speed Rating (r/min):9700; Clearance:Standard; Cage Type:Steel; Static Load Rating (kN):60.8; Weight:0.30 KGS; Size (mm):10 mm x 30 mm x 9 mm ; |
| 99870 / CR99870 Stainless Speedi Sleeve For Shaft Repair | J:152.4 mm; a:6.35 mm; Attachment bolt diameter G:19.05 mm; L:193.675 mm; A:69.85 mm; d2:111.125 mm; A1:98.425 mm; Mass bearing unit:12.3 kg; s:31.75 mm; da:74.612 mm; |
| 85212 / CR85212 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):13000; d:30mm; Static Load Rating (kN):8.3; D:55mm; SKU:6006c3-nsk; Weight:0.02 KGS; Clearance:C3; Fatigue Load Rating (kN):--; Dynamic Load Rating (kN):13.2; Reference Speed Rating (r/min):--; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
81391 / CR81391 Stainless Speedi Sleeve For Shaft Repair Video