| No. | Brand | J | F | f | T | A | s | S | r |
| 9mm | - | - | - | - | - | - | - | - | - |
| 300-500kg/h | - | - | - | - | - | - | - | - | - |
| 50X50cm | - | - | - | - | - | - | - | - | - |
| 70BNR10ETYNDUELP4 | NSK | - | - | - | - | - | - | - | - |
| (50W | - | - | - | - | - | - | - | - | - |
| BMV630 | - | - | - | - | - | - | - | - | - |
| 100W/300W | - | - | - | - | - | - | - | - | - |
| NJ218ECM | SKF | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 1980-1990 | Timken | - | - | - | - | - | - | - | - |
| EX60 | - | - | - | - | - | - | - | - | - |
| LM5050-WN30-12V | - | - | - | - | - | - | - | - | - |
| 50%Min | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 51330F | SKF | - | - | - | - | - | - | - | - |
| (Zhv1) | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | 45 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 1307 | NSK | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| CR99816 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; Static Load Rating (kN):47.5; d:55mm; Seals or Shields:Two Metal Shields; Clearance:C3; Reference Speed Rating (r/min):7100; D:120mm; Dynamic Load Rating (kN):83; Weight:0.02 KGS; Cage Type:Steel; |
| CR99237 Stainless Steel Speedi Sleeve For Shaft Repair | d:220 mm; ra max.:4 mm; D:460 mm; Calculation factor A:9.98; r3,4 min.:2 mm; Calculation factor kr:0.09; d1 ≈:314.4 mm; Limiting speed:1700 r/min; D1 ≈:372 mm; Basic dynamic load rating C:494 kN; |
| AH24038 Withdrawal Sleeve(matched Bearing:24038CCK,24038CAK, 24038CCK30/W33, C4038K30V | SKU:1201etn9-qbl; Seals or Shields:Open Type; B:10mm; D:32mm; Clearance:Standard; d:12mm; Cage Type:Plastic; Weight:0.02 KGS; Availability:In Stock; |
| AOHX241/600 (241/600CAK, 241/600CCK, 241/600ECAK30/W33 Bearing Withdrawal Sleeve) | Static Load Rating (kN):66; Availability:In Stock; d:105mm; D:160mm; B:26mm; Weight:1.58 KGS; Cage Type:Steel; Dynamic Load Rating (kN):72.5; Seals or Shields:Two Rubber Seals; Clearance:C3; |
| AH2309 Withdrawal Sleeve (22309EK Bearing) | Dynamic Load Rating (kN):4.75; Static Load Rating (kN):1.96; D:26mm; Weight:0.02 KGS; B:8mm; Availability:In Stock; Clearance:Standard; SKU:629-2rsh-skf; Limiting Speed Rating (r/min):19000; Cage Type:Steel; |
| CR99125 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:3214b-2znrtn-qbl; B:39.7mm; d:70mm; Weight:0.02 KGS; Clearance:Standard; Seals or Shields:Two Metal Shields; D:125mm; Cage Type:Plastic; |
| 85397 / CR85397 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Weight:4.84 KGS; d:100mm; Availability:In Stock; B:46mm; D:180mm; Cage Type:Steel; Clearance:C3; Grease Limiting Speed (r/min):2400; Static Load Rating (kN):490; |
| 87463 / CR87463 Stainless Speedi Sleeve For Shaft Repair | Calculation factor Y0:2.8; B:31 mm; ra max.:2 mm; Mass bearing + sleeve:2.2 kg; r1,2 min.:2.1 mm; D1 ≈:115 mm; Fatigue load limit Pu:26.5 kN; Calculation factor e:0.22; B1:40 mm; Calculation factor Y2:4.6; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
86403 / CR86403 Stainless Speedi Sleeve For Shaft Repair Video