| AOHX31/710 (231/710CAK/W33, C31/710K, 231/710CAK, 231/710CCK Bearing Withdrawal Sleeve) | Seals or Shields:Open Type; Weight:0.02 KGS; SKU:22211-e1-fag; Limiting Speed Rating (r/min):8500; B:25mm; Static Load Rating (kN):130; Availability:In Stock; d:55mm; Clearance:Standard; Fatigue Load Rating (kN):17.3; |
| AOH3172G(23172CCK, 23172CAK, 23172CCK/W33, C3172KM Bearing Withdrawal Sleeve) | Basic Dynamic Radial Load Rating C:45700 N; Accessories:One Shield & Snap-Ri; B:23.00 mm; Basic Static Radial Load Rating Co:32500 N; d:30.000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; Fillet Radius ra:1.50 mm; D:90.0000 mm; |
| AOHX31/500G (231/500CAK/W33, C31/500KM, 231/500CAK, 231/500CCK Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):265; Reference Speed Rating (r/min):1200; D:460mm; Clearance:Standard; Seals or Shields:Open Type; B:118mm; Dynamic Load Rating (kN):2120; d:300mm; Cage Type:Steel; Availability:In Stock; |
| TIH 100M/MV Bearing Induction Heater | Limiting Speed Rating (r/min):9000; Availability:In Stock; Reference Speed Rating (r/min):5500; Static Load Rating (kN):86.5; d:80mm; B:39mm; SKU:6316-m-fag; Seals or Shields:Open Type; D:170mm; Weight:3.75 KGS; |
| AHX2330G Withdrawal Sleeve(matched Bearing:22330CCK/W33, 22330CAK/W33) | Grease Speed Rating n1:2900 rpm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:108000 N; Fillet Radius rb:0.040 in; d:6.000 in; Fillet Radius ra:0.10 in; D:8.0000 in; Basic Dynamic Radial Load Rating C:81900 N; B:1.0000 in; |
| HMV64E / HMV 64E Hydraulic Nut 322x428x63mm | Oil Limiting Speed (r/min):1000; B:138mm; Static Load Rating (kN):2990; D:420mm; Weight:92.60 KGS; Cage Type:Brass; d:200mm; Clearance:Standard; SKU:22340camke4-nsk; Seals or Shields:Open Type; |
| CR99815 Stainless Steel Speedi Sleeve For Shaft Repair | Da:150 mm; J min.:250.825 mm; Mass pillow block:18 kg; S:4.763 mm; A2:127 mm; PosiTrac Plus contact element:2 x B10724-53; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 5/8-11 UNC; H1:95.25 mm; PG:1/8 NPT; |
| CR99254 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; SKU:mr105-zen; Seals or Shields:Open Type; Weight:0.20 KGS; B:3mm; Cage Type:Steel; d:5mm; D:10mm; Clearance:Standard; |