| No. | Brand | J | F | f | T | A | s | S | r |
| [5 | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 23948 | SKF | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| MKD041B-144-KGO-KN | Rexroth | - | - | - | - | - | - | - | - |
| 800mm | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | 1391 mm | - | - | - | - | - | - |
| TCCA90 | - | - | - | - | - | - | - | - | - |
| 19mm | - | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| 2005-10 | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| F600B-V | Parker | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 30 mm x 62 mm x 16 mm H315X Adapter Sleeve 65x98x55mm | Reference Speed Rating (r/min):56000; Seals or Shields:Open Type; Availability:In Stock; D:30mm; Cage Type:Plastic; B:9mm; Clearance:Standard; d:10mm; Static Load Rating (kN):1.18; Weight:0.03 KGS; Size (mm):30 mm x 62 mm x 16 mm ; |
| TLGH 1 Grease Gun | Mass adapter sleeve assembly:0.64 kg; Sleeve:S 13x2.3/16; Lock nut:N 13; B:14.554 mm; G:64.719 mm; B4:15.9 mm; d:65 mm; B1:53.086 mm; Lock washer:W 13; d1:55.563 mm; |
| MSR40x1.5 Precision Locknut / MSR-M40x1.5 Locking Nut (M40x1.5)x58x22mm | Thrust factor K:1.99; Basic static load rating C0:22400 kN; Calculation factor Y2:3.4; Calculation factor Y1:2.3; B:450 mm; T:450 mm; d1 ≈:510 mm; D:660 mm; Comparative radial load rating CF:2320 kN; r3,4 min.:6 mm; |
| 90149 / CR90149 Stainless Speedi Sleeve For Shaft Repair | d:60.000 mm; Basic Static Radial Load Rating Co:14300 N; B:13.00 mm; Basic Dynamic Radial Load Rating C:16500 N; Oil Speed Rating Open/Shielded n2:9000 rpm; Accessories:One Seal; Sealed Speed Rating n3:4500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; D:85.0000 mm; |
| 87406 / CR87406 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Cage Type:Steel; Limiting Speed Rating (r/min):510; Seals or Shields:Open Type; D:460mm; Dynamic Load Rating (kN):3210; Weight:118.00 KGS; d:280mm; Static Load Rating (kN):5060; B:180mm; |
| 86454 / CR86454 Stainless Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; D:160mm; Oil Limiting Speed (r/min):3000; B:32.5mm; SKU:30218-ntn; d:90mm; Clearance:Standard; Condition:New; Dynamic Load Rating (kN):208; Availability:In Stock; |
| AOH24072(24072CCK, 24072CAK, 24072CCK30/W33 Bearing Withdrawal Sleeve) | Locating ring:2 x FRB 17/280; L:510 mm; s:14 mm; Appropriate attachment bolt, size G:24 mm; P180°:850 kN; Oil level, min.:47 mm; H:333 mm; P150°:680 kN; Bearing (basic designation):C 3036 K; Ca:108 mm; |
| AH217 Withdrawal Sleeve 80x85x38.5mm | Static Load Rating (kN):238.2; Availability:In Stock; B:40mm; Clearance:Standard; d:130mm; D:230mm; Seals or Shields:Open Type; Speed Rating (r/min):6100; Cage Type:Plastic; Dynamic Load Rating (kN):222.4; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
84390 / CR84390 Stainless Speedi Sleeve For Shaft Repair Video