| No. | Brand | J | F | f | T | A | s | S | r |
| 250 | - | - | - | - | - | 9 mm | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 600x400 | - | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 24124-E1-C4 | fag | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| (NH4) | - | - | - | - | - | - | - | - | - |
| 6mm/9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | 45 mm | - | - | - | - | - | - |
| EX85 | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 1000 | NTN | 92 mm | - | - | - | 35 mm | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| RG250 | - | - | - | - | - | - | - | - | - |
| AH209 Withdrawal Sleeve 40x45x26mm | Clearance:Standard; Seals or Shields:Open Type; Cage Type:Steel; d:70mm; B:35mm; Reference Speed Rating (r/min):8500; SKU:1314-skf; Weight:0.02 KGS; Fatigue Load Rating (kN):1.34; Limiting Speed Rating (r/min):6000; |
| FTRB2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x1.5mm | Dynamic Load Rating (kN):46.2; Static Load Rating (kN):29; B:21mm; Weight:0.02 KGS; Availability:In Stock; Limiting Speed Rating (r/min):9000; SKU:6211nr-skf; Cage Type:Steel; Condition:New; Seals or Shields:Open Type; |
| TRE815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x4mm | D1 ≈:619 mm; B:100 mm; Da max.:652 mm; Mass bearing:107 kg; ra max.:4 mm; da min.:518 mm; Fatigue load limit Pu:355 kN; Limiting speed:1200 r/min; Axial load factor Y:0.4; Basic dynamic load rating C:2050 kN; |
| 99368 / CR99368 Stainless Speedi Sleeve For Shaft Repair | Limiting speed:4300 r/min; Calculation factor Y0:0.8; Calculation factor Y:1.35; Fatigue load limit Pu:33.5 kN; Db min.:141 mm; D:152.4 mm; B:36.322 mm; db min.:106.5 mm; da max.:104 mm; d:92.075 mm; |
| CP34565 Thrust Plate 45x64.4x3mm | B:49mm; Limiting Speed Rating (r/min):4200; SKU:6321 c3-timken; Clearance:C3; D:225mm; Reference Speed Rating (r/min):6000; Weight:8.11 KGS; Dynamic Load Rating (kN):183.7; Cage Type:Steel; Static Load Rating (kN):153.1; |
| 90221 / CR90221 Stainless Speedi Sleeve For Shaft Repair | B:31mm; Clearance:C4; Availability:In Stock; Static Load Rating (kN):232; d:70mm; D:125mm; Weight:1.58 KGS; Grease Limiting Speed (r/min):3600; Oil Limiting Speed (r/min):4500; Cage Type:Steel; |
| AH30/630 Withdrawal Sleeve 600x630x258mm | Dimension C:52.4 mm; Dimension S1:22.2 mm; Insert Bearing IB:ZMaRC; Width A:27.0 mm; Diameter G:10.3 mm; Shaft Diameter D:30 mm; Dimension L:82.6 mm; Dimension N:9.9 mm; Dimension F:12.7 mm; Basic Static Radial Load Rating Co:11200 N; |
| CR99825 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):127; D:180mm; Availability:In Stock; Fatigue Load Rating (kN):3.35; Seals or Shields:Two Rubber Seals; SKU:6220-2rs1/c3-skf; d:100mm; Limiting Speed Rating (r/min):2600; Cage Type:Steel; Static Load Rating (kN):93; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
84263 / CR84263 Stainless Speedi Sleeve For Shaft Repair Video