| No. | Brand | J | F | f | T | A | s | S | r |
| (NH4) | - | - | - | - | - | - | - | - | - |
| 40X74X36 | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 6W | - | - | - | - | - | - | - | 4.763 mm | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| 4-Spec | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| 20pcs | - | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| 1214K | fag | - | - | - | - | - | - | - | - |
| MU1012L | Bower | - | - | - | - | - | - | - | - |
| P2 | - | - | - | - | - | - | - | - | - |
| 1500 | fag | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| A2F10.12.23.28.45.55W3P1 | - | - | - | - | - | - | - | - | - |
| 50 | John Deere | - | - | - | - | - | - | - | - |
| 27pc | - | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| TKRS 20 Stroboscope | da:180 mm; R1:278 mm; Pa:500 kN; O2:220 mm; Oil fill, max.:4.2 l; N:42 mm; d1:205 mm; H0:545 mm; P120°:1040 kN; Oil fill, min.:2.9 l; |
| CR99180 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Seals or Shields:Open Type; B:43mm; SKU:22311-e1-k-qbl; D:120mm; d:55mm; Availability:In Stock; Cage Type:Steel; Clearance:Standard; |
| CR99274 Stainless Steel Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:63700 N; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:2600 rpm; Basic Static Radial Load Rating Co:54000 N; d:100.000 mm; Grease Speed Rating Open/Shielded n1:4300 rpm; Accessories:Two Seals & Snap-Rin; Oil Speed Rating Open/Shielded n2:5000 rpm; B:24.00 mm; D:150.0000 mm; |
| 99726 / CR99726 Stainless Speedi Sleeve For Shaft Repair | d:320mm; Weight:77.40 KGS; SKU:23064embw507c08c4-ti; B:121mm; Cage Type:Brass; D:480mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2410; Static Load Rating (kN):3880; Limiting Speed Rating (r/min):880; |
| CP21528 Thrust Plate 15x27.5x2mm | Seals or Shields:Open Type; Weight:115.00 KGS; Dynamic Load Rating (kN):2900; Fatigue Load Rating (kN):360; Reference Speed Rating (r/min):900; Cage Type:Steel; Availability:In Stock; Clearance:Standard; B:135mm; Static Load Rating (kN):5000; |
| EAZ 180 Induction Heater | Oil Limiting Speed (r/min):12000; Fatigue Load Rating (kN):3.05; D:150mm; Grease Limiting Speed (r/min):8000; Preload:Light; Cage Type:Plastic; B:24mm; Clearance:Standard; Static Load Rating (kN):80; d:100mm; |
| 87875 / CR87875 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1630; Availability:In Stock; Cage Type:Brass; Weight:34.70 KGS; Seals or Shields:Open Type; D:320mm; Limiting Speed Rating (r/min):1200; B:104mm; SKU:23138kemw507c08-timk; Clearance:Standard; |
| 84963 / CR84963 Stainless Speedi Sleeve For Shaft Repair | SKU:22326-e1a-k-ma-t41a-; D:280mm; Cage Type:Brass; Dynamic Load Rating (kN):1040; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; Weight:0.02 KGS; B:93mm; Static Load Rating (kN):1340; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
83760 / CR83760 Stainless Speedi Sleeve For Shaft Repair Video