| No. | Brand | J | F | f | T | A | s | S | r |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| C4032-2CS5V/GEM9 | - | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| Ex200 | Hitachi | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| 17" | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| 25909 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| 2/M | Rexroth | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| 6204 | NTN | - | - | - | - | - | - | - | - |
| 250 | NTN | - | - | - | - | - | - | - | - |
| L0098953B | Parker | - | - | - | - | - | - | - | - |
| F636ZZ | - | - | - | - | - | - | - | - | - |
| SL045024 | INA | - | - | - | - | - | - | - | - |
| 2X(607Z | - | - | - | - | - | - | - | - | - |
| 121400202001) | - | - | - | - | - | - | - | - | - |
| CR99835 Stainless Steel Speedi Sleeve For Shaft Repair | D:120mm; Clearance:Standard; SKU:22311ejw33w21a-timke; Availability:In Stock; Dynamic Load Rating (kN):266; Seals or Shields:Open Type; Static Load Rating (kN):265; Cage Type:Steel; Weight:2.40 KGS; Limiting Speed Rating (r/min):4300; |
| AH218 Withdrawal Sleeve 85x90x40mm | H2:61.913 mm; J min.:304.8 mm; J1:57.15 mm; Attachment bolt diameter G:19.05 mm; da:93.662 mm; A:114.3 mm; B:116.681 mm; Basic dynamic load rating C:311 kN; Mass bearing unit:22.9 kg; A1:133.35 mm; |
| AHX2311 Withdrawal Sleeve (matched Bearing:2311K, 22311EK) | SKU:3311a/c3-qbl; Clearance:C3; Seals or Shields:Open Type; Weight:0.02 KGS; D:120mm; B:49.2mm; d:55mm; Availability:In Stock; Cage Type:Steel; |
| AOH240/630G (240/630CAK, 240/630CCK, 240/630ECAK30/W33 Bearing Withdrawal Sleeve) | B:30 mm; K:3.5 mm; Basic dynamic load rating C:114 kN; D1 ≈:87 mm; da min.:75.2 mm; D:100 mm; Da max.:95 mm; Reference speed:3000 r/min; Basic static load rating C0:193 kN; d1 ≈:83 mm; |
| CP2035 Thrust Plate 20x34.5x0.8mm | Da max.:78 mm; Calculation factor Y2:4.6; B2:13 mm; d3:65 mm; Basic static load rating C0:7.8 kN; D:85 mm; B1:39 mm; Calculation factor e:0.21; da max.:53 mm; Calculation factor Y0:3.2; |
| 90347 / CR90347 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Dynamic Load Rating (kN):117; D:190mm; d:90mm; Seals or Shields:Open Type; SKU:1318k-skf; Limiting Speed Rating (r/min):4500; Weight:0.02 KGS; Cage Type:Steel; B:43mm; |
| CP1.57095 Thrust Plate 70x94.3x1.5mm | Grease Speed Rating Open/Shielded n1:3600 rpm; Oil Speed Rating Open/Shielded n2:4300 rpm; Sealed Speed Rating n3:2200 rpm; D:165.0000 mm; Accessories:Two Seals; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:43000 N; B:18.00 mm; d:130.000 mm; Basic Dynamic Radial Load Rating C:37700 N; |
| FTRE85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x3mm | SKU:22217ek/c4-qbl; d:85mm; Cage Type:Steel; Seals or Shields:Open Type; D:150mm; Weight:0.02 KGS; B:36mm; Availability:In Stock; Clearance:C4; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
86145 / CR86145 Stainless Speedi Sleeve For Shaft Repair Video