| No. | Brand | J | F | f | T | A | s | S | r |
| 6315 | FAFNIR | - | - | - | - | - | - | - | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| 6219-2Z/C3 | - | - | - | - | - | - | - | - | - |
| PC800-8 | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| (NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| 110A-036-AS-0, | Parker | - | - | - | - | - | - | - | - |
| 2019 | INA | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| (DR-298) | - | - | - | - | - | - | - | - | - |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| 07433-71103,07432-71201,07430-72201,07432-72101,07440-72202,07432-71203,07436-72202,07443-6710 | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| RKS062 | SKF | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| 220g | - | - | - | - | - | - | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| HMV21E / HMV 21E Hydraulic Nut (M105x2)x172x44mm | d:7.000 mm; Accessories:One Shield; Basic Static Radial Load Rating Co:1360 N; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:3250 N; Oil Speed Rating Open/Shielded n2:43000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm; D:22.0000 mm; Sealed Speed Rating n3:23000 rpm; B:7.00 mm; |
| 86404 / CR86404 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.225; D:40mm; Seals or Shields:Two Metal Shields; Clearance:Standard; Dynamic Load Rating (kN):10.1; SKU:6203-2zr-fag; Weight:0.02 KGS; Reference Speed Rating (r/min):18100; B:12mm; d:17mm; |
| AOH3048 Withdrawal Sleeve(23048CAK,23048CCK/W33, C3048K Bearing Sleeve) | Basic static load rating C0:3250 kN; d:110 mm; r2 min.:1 mm; Da min.:141.5 mm; da min.:118 mm; r1 min.:1 mm; D:160 mm; Specific dynamic load factor K:100 N/mm²; C:55 mm; Lubricant:Regular relubricatio; |
| AH2338G Withdrawal Sleeve(matched Bearing:22338CCK, 22338CAK, 22338CCK/W33) | Seals or Shields:Two Metal Shields; Static Load Rating (kN):58.5; B:36.5mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Fatigue Load Rating (kN):2.5; Weight:0.02 KGS; Dynamic Load Rating (kN):73.5; Cage Type:Steel; Clearance:C3; |
| 99374 / CR99374 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Static Load Rating (kN):40200; B:30.2mm; Weight:0.02 KGS; Dynamic Load Rating (kN):50700; Availability:In Stock; Oil Limiting Speed (r/min):4600; Seals or Shields:Two Rubber Seals; Grease Limiting Speed (r/min):4000; Cage Type:Plastic; |
| CR170x200x15HMSA10 RG Shaft Oil Seal 170x200x15mm | D:100mm; Cage Type:Brass; B:36mm; d:45mm; SKU:22309emw33w800c4-tim; Availability:In Stock; Limiting Speed Rating (r/min):5100; Dynamic Load Rating (kN):180; Static Load Rating (kN):169; Clearance:C4; |
| CP45578 Thrust Plate 55x77.4x4mm | S:0.794 mm; Mass bearing unit:4.22 kg; B:73.025 mm; da:42.862 mm; A1:78.581 mm; H2:31.75 mm; A:60.325 mm; s:25.4 mm; J min.:155.575 mm; J max.:161.925 mm; |
| CP816 Thrust Plate 8x15.4x0.8mm | Cage Type:Brass; Dynamic Load Rating (kN):71.5; Reference Speed Rating (r/min):6000; Clearance:Standard; Seals or Shields:Open Type; Limiting Speed Rating (r/min):6000; d:70mm; Fatigue Load Rating (kN):2.5; Static Load Rating (kN):60; SKU:7214becby-skf; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
85033 / CR85033 Stainless Speedi Sleeve For Shaft Repair Video