| No. | Brand | J | F | f | T | A | s | S | r |
| 512038 | Timken | - | - | - | - | 60.325 mm | 25.4 mm | 0.794 mm | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| 1000d | INA | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| (20pcs) | - | - | - | - | - | - | - | - | - |
| 511031 | Timken | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | - |
| 7001140808 | INA | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| r155.88 | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| 6HK1 | - | - | - | - | - | - | - | - | - |
| H2EWXBBL53B | Parker | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| KM-29 | SKF | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 07433-71103,07432-71201,07430-72201,07432-72101,07440-72202,07432-71203,07436-72202,07443-6710 | - | - | - | - | - | - | - | - | - |
| R450-7 | - | - | - | - | - | - | - | - | - |
| 6204ETN9 | SKF | - | - | - | 47.1 mm | - | - | - | - |
| sl045030-pp-2nr | INA | - | - | - | - | - | - | - | - |
| (12 | SKF | - | - | - | - | - | - | - | - |
| TRD916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x3.2mm | R2:22.225 mm; da:85 mm; End plug (suffix Y):EPR 9; Stabilizing ring:SR-17-14; Appropriate attachment bolt size G:0.625 in; P180°:25.4 kN; RG:3/8 NPT; PosiTrac Plus contact element (dc shaft position):B10724-64; Bearing:22217 E; Pa:16.5 kN; |
| 86631 / CR86631 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:20000 rpm; D:32.0000 mm; Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:10400 N; B:15.9 mm; Basic Static Radial Load Rating Co:5600 N; D2R:30.2 mm; Fillet Radius ra:0.64 mm; Sealed Speed Rating n3:15000 rpm; Grease Speed Rating n1:15000 rpm; |
| CR99144 Stainless Steel Speedi Sleeve For Shaft Repair | d:35mm; Seals or Shields:Open Type; Cage Type:Plastic; B:21mm; Limiting Speed Rating (r/min):9500; Dynamic Load Rating (kN):25.5; SKU:1307-tvh-fag; Availability:In Stock; Reference Speed Rating (r/min):10900; Fatigue Load Rating (kN):0.485; |
| CPR865115 Thrust Plate 65x115x8mm | Clearance:Standard; Static Load Rating (kN):40.4; Seals or Shields:Open Type; SKU:2mm208wicrsuh-timken; Availability:In Stock; B:18mm; D:80mm; Weight:0.35 KGS; d:40mm; Cage Type:Plastic; |
| TKSA 20 Shaft Alignment Tool | Availability:In Stock; SKU:2mm220wicrdum-timken; Dynamic Load Rating (kN):126.8; Clearance:Standard; d:100mm; D:180mm; B:34mm; Cage Type:Plastic; Seals or Shields:Open Type; Static Load Rating (kN):165.2; |
| CR99838 Stainless Steel Speedi Sleeve For Shaft Repair | Reference speed:240 r/min; Limiting speed:450 r/min; Mass bearing:810 kg; d:800 mm; B1:222 mm; Minimum axial load factor A:290; Basic dynamic load rating C:11300 kN; B:78 mm; Fatigue load limit Pu:3900 kN; D:1180 mm; |
| AHX2326G Withdrawal Sleeve(matched Bearing:22326CCK/W33) | D:110mm; SKU:1212kj-qbl; B:22mm; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; d:60mm; Weight:0.02 KGS; Cage Type:Steel; |
| VHIN 10 Bearing Induction Heater | Limiting Speed Rating (r/min):11400; Dynamic Load Rating (kN):5.1; B:10mm; SKU:s6003-2rsr-fag; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):2.6; d:17mm; Clearance:Standard; D:35mm; Weight:0.04 KGS; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
85491 / CR85491 Stainless Speedi Sleeve For Shaft Repair Video