| No. | Brand | J | F | f | T | A | s | S | r |
| 1100*1100*155mm | - | - | - | - | - | - | - | - | - |
| A4vg28/A4vg40/A4vg56 | Rexroth | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1.5mm-2mm | - | - | - | - | - | - | - | - | - |
| SHF20-XRB | - | - | - | - | - | - | - | - | - |
| 7014CD/P4A | SKF | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| MKD090B-035-KG1-KN | Rexroth | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| NU312ET | NSK | - | - | - | - | - | - | - | - |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| 7000ACM | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 6008.2ZR | fag | - | 248 mm | - | - | - | - | - | - |
| SQP41-50-2/3/4/5/6/7/8/9/10/11/12/14 | TOKYO | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| GK45DO | - | - | - | - | - | - | - | - | - |
| 99605 / CR99605 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):285; Seals or Shields:Open Type; Fatigue Load Rating (kN):12.3; D:200mm; Availability:In Stock; Limiting Speed Rating (r/min):5600; Cage Type:Brass; Dynamic Load Rating (kN):250; Clearance:C3; Weight:5.66 KGS; |
| TKES 10F Endoscope | D:58mm; Seals or Shields:Two Rubber Seals; SKU:6809dd-nsk; d:45mm; Grease Limiting Speed (r/min):11000; Availability:In Stock; Oil Limiting Speed (r/min):13000; Dynamic Load Rating (kN):6.6; B:7mm; Cage Type:Steel; |
| AOH240/950 (240/950CAK30/W33, 240/950CAK, 240/950CCK,240/950CCK/W33 Bearing Withdrawal Sleeve) | D:47mm; Cage Type:Plastic; Clearance:Standard; Availability:In Stock; Weight:0.12 KGS; SKU:7303beat85-nsk; Static Load Rating (kN):8.3; Dynamic Load Rating (kN):16; Seals or Shields:Open Type; d:17mm; |
| 90174 / CR90174 Stainless Speedi Sleeve For Shaft Repair | D:360mm; Cage Type:Brass; Static Load Rating (kN):2700; Dynamic Load Rating (kN):1940; Clearance:C4; Fatigue Load Rating (kN):220; d:200mm; SKU:23240-b-k-mb-c4-fag; Weight:0.02 KGS; Availability:In Stock; |
| TMSP 1 Sound Pressure Meter | Availability:In Stock; d:75mm; D:130mm; Cage Type:Brass; Seals or Shields:Open Type; B:31mm; Weight:0.02 KGS; SKU:22215-e1a-m-c3-qbl; Clearance:C3; |
| 99465 / CR 99465 Stainless Speedi Sleeve For Shaft Repair | Permissible sliding velocity v min.:0.25 m/s; D:41 mm; d:35 mm; Mass bushing:0.055 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; B:25 mm; Permissible sliding velocity v max.:5 m/s; |
| HMV73E / HMV 73E Hydraulic Nut 367x482x68mm | D:280mm; B:109mm; Weight:0.02 KGS; Clearance:C4; Availability:In Stock; Seals or Shields:Open Type; SKU:24134cc/c4w33-qbl; d:170mm; Cage Type:Steel; |
| 89948 / CR89948 Stainless Speedi Sleeve For Shaft Repair | d:55mm; Weight:0.71 KGS; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.54; Clearance:C3; Reference Speed Rating (r/min):14000; Limiting Speed Rating (r/min):9000; Cage Type:Plastic; SKU:1211ektn9/c3w64-skf; Availability:In Stock; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
90070 / CR90070 Stainless Speedi Sleeve For Shaft Repair Video