| No. | Brand | J | F | f | T | A | s | S | r |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| MBX80 | NTN | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | 185 mm | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 305183 | - | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| HK1015 | - | - | - | - | - | - | - | - | - |
| 7007CSN24TRV1VS-01 | NSK | - | - | - | - | - | - | - | - |
| N202-E-TVP2 | fag | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| 0821200230 | Rexroth | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| E0e1e2 | - | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| AOH241/670 (241/670ECAK30/W33, 241/670CCK, 241/670CAK, 241/670CAK/W33 Bearing Withdrawal Sleeve) | Clearance:C3; Static Load Rating (kN):1690; Weight:41.50 KGS; Grease Limiting Speed (r/min):1100; d:150mm; Oil Limiting Speed (r/min):1400; Availability:In Stock; B:108mm; Dynamic Load Rating (kN):1220; D:320mm; |
| 99300 / CR99300 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:1.50 mm; d:35.000 mm; D:100.0000 mm; B:25.00 mm; Basic Static Radial Load Rating Co:31000 N; Oil Speed Rating Open/Shielded n2:8500 rpm; Accessories:Snap-Ring; Sealed Speed Rating n3:4900 rpm; Grease Speed Rating Open/Shielded n1:7000 rpm; Basic Dynamic Radial Load Rating C:55300 N; |
| TKRS 20 Stroboscope | da:180 mm; R1:278 mm; Pa:500 kN; O2:220 mm; Oil fill, max.:4.2 l; N:42 mm; d1:205 mm; H0:545 mm; P120°:1040 kN; Oil fill, min.:2.9 l; |
| FTRB1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x1.5mm | Calculation factor (back-to-back, face-to-face) X2:0.67; Calculation factor (single, tandem) Y2:0.87; Fatigue load limit Pu:0.38 kN; Number of balls z:32; d:65 mm; C1:6.5 mm; Calculation factor (back-to-back, face-to-face) Y2:1.41; Preload class B GB:120 N; Basic dynamic load rating C:13.5 kN; Calculation factor (single, tandem) Y0:0.38; |
| 86090 / CR86090 Stainless Speedi Sleeve For Shaft Repair | SKU:s696a-zen; Availability:In Stock; Weight:0.20 KGS; B:5mm; Seals or Shields:Open Type; d:6mm; Cage Type:Steel; D:16mm; Clearance:Standard; |
| CR99849 Stainless Steel Speedi Sleeve For Shaft Repair | B:82mm; Static Load Rating (kN):1760; d:200mm; Limiting Speed Rating (r/min):1500; Seals or Shields:Open Type; Cage Type:Steel; Reference Speed Rating (r/min):1800; Clearance:Standard; D:310mm; Availability:In Stock; |
| 86563 / CR86563 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; d:25mm; B:17mm; D:62mm; Availability:In Stock; SKU:6305-2rs/c3-qbl; Clearance:C3; Cage Type:Steel; |
| CP34565 Thrust Plate 45x64.4x3mm | B:49mm; Limiting Speed Rating (r/min):4200; SKU:6321 c3-timken; Clearance:C3; D:225mm; Reference Speed Rating (r/min):6000; Weight:8.11 KGS; Dynamic Load Rating (kN):183.7; Cage Type:Steel; Static Load Rating (kN):153.1; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Cylindrical Roller Bearings NU336-E-XL-TVP2 180x380x75mm Video