| No. | Brand | J | F | f | T | A | s | S | r |
| TCR2 | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 501 | - | - | - | - | - | - | - | - | - |
| 7001140808 | INA | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| r155.88 | - | - | - | - | - | - | - | - | - |
| (80W | - | - | - | - | - | - | - | - | - |
| GS81156 | INA | - | - | - | - | - | - | - | - |
| 350W | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| 4WE10C3X/CW230N9K4 | Rexroth | - | - | - | - | - | - | - | - |
| r404063451 | Rexroth | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| 100mm | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 6704ZZ | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 87738 / CR87738 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Accessories:Two Shields & Snap-R; Sealed Speed Rating n3:2400 rpm; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:73500 N; D:170.0000 mm; d:110.000 mm; Basic Dynamic Radial Load Rating C:81800 N; |
| CP1.585110 Thrust Plate 85x109.3x1.5mm | Weight:0.02 KGS; Seals or Shields:Open Type; B:80mm; Clearance:Standard; Availability:In Stock; SKU:22232-e1-qbl; Cage Type:Steel; D:290mm; d:160mm; |
| 81389 / CR81389 Stainless Speedi Sleeve For Shaft Repair | d:65mm; Cage Type:Steel; SKU:52216-qbl; Seals or Shields:Open Type; Weight:1.70 KGS; D:115mm; B:48mm; Clearance:Standard; Availability:In Stock; |
| AS100135 Thrust Needle Roller Bearing Washer 100x135x1mm | SKU:2313jc3-nsk; d:65mm; D:140mm; Dynamic Load Rating (kN):97; Clearance:C3; Availability:In Stock; Cage Type:Steel; Static Load Rating (kN):32.5; Grease Limiting Speed (r/min):3800; Weight:0.02 KGS; |
| AOH240/900 (240/900ECAK30/W33, 240/900CAK, 240/900CCK, 240/900CCK/W33 Bearing Withdrawal Sleeve) | Reference Speed Rating (r/min):5800; B:37mm; Weight:3.18 KGS; Dynamic Load Rating (kN):114; Availability:In Stock; Limiting Speed Rating (r/min):9500; Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):76.5; SKU:6315-fag; |
| 90805 / CR90805 Stainless Speedi Sleeve For Shaft Repair | D:480 mm; d:360 mm; Axial load factor Y:0.6; Da max.:465 mm; db min.:392 mm; Basic static load rating C0:1460 kN; Calculation factor kr:0.1; Limiting speed:2000 r/min; D1 ≈:438 mm; Reference speed:1400 r/min; |
| FTRB7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x1.5mm | Fatigue load limit Pu:212 kN; +:0.2 mm; B:95 mm; ra max.:1.5 mm; Basic static load rating C0:2160 kN; d:260 mm; Snap ring Seeger:SW 340; C:94 mm; r min.:1.8 mm; C2:5.4 mm; |
| FTRC1730 Thrust Bearing Ring / Thrust Needle Bearing Washer 17x30x2mm | Clearance:C3; Cage Type:Plastic; Availability:In Stock; d:30mm; B:27mm; SKU:2306tnc3-qbl; D:72mm; Weight:0.02 KGS; Seals or Shields:Open Type; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
86562 / CR86562 Stainless Speedi Sleeve For Shaft Repair Video