| No. | Brand | J | F | f | T | A | s | S | r |
| 20W | - | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 2.2 | Dodge | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| GS905 | - | - | - | - | - | - | - | - | - |
| GAC80S | SKF | - | - | - | - | - | - | - | - |
| 38, | Parker | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 9 | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 22314CDE4 | NSK | - | - | - | - | - | - | - | - |
| TRC-411 | koyo | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 3307 | - | - | - | - | - | - | - | - | - |
| 2016-2018 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| 50X90X20 | - | - | - | - | - | - | - | - | - |
| MCV3_ | - | - | - | - | - | - | - | - | - |
| 020.40.1800 | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| AHX3120 Withdrawal Sleeve(matched Bearing:23120CCK/W33, C2320K, C3120K, C3120KV) | Limiting Speed Rating (r/min):4000; Availability:In Stock; Fatigue Load Rating (kN):50; d:85mm; Dynamic Load Rating (kN):540; Cage Type:Steel; Reference Speed Rating (r/min):3200; Seals or Shields:Open Type; D:180mm; Clearance:Standard; |
| 86175 / CR86175 Stainless Speedi Sleeve For Shaft Repair | B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; Housing:FYAWK 506 L; L:83 mm; Mass bearing unit:0.48 kg; J1:31.8 mm; J:47.6 mm; |
| TMDT 2-37 Extension Cable | H:336.55 mm; P120°:85.9 kN; Pa:40 kN; J1:95.25 mm; A1:158.75 mm; Initial grease fill:793.8 g; Appropriate attachment bolt size G:1 in; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 19; Cap bolt, SAE grade:5; |
| TMAS 50/KIT Machinery Shim Kit | Weight:2.15 KGS; Grease Limiting Speed (r/min):6700; B:28mm; Oil Limiting Speed (r/min):10000; Preload:Light; Seals or Shields:Open Type; d:120mm; Dynamic Load Rating (kN):111; Fatigue Load Rating (kN):4; Availability:In Stock; |
| 86601 / CR86601 Stainless Speedi Sleeve For Shaft Repair | B:33mm; D:200mm; Cage Type:Plastic; Weight:3.27 KGS; Seals or Shields:Open Type; SKU:3mm9126wicrdul-timke; Clearance:Standard; Static Load Rating (kN):135.7; Speed Rating (r/min):5800; Dynamic Load Rating (kN):129.9; |
| CR99055 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):167; SKU:6226mc3-nsk; D:230mm; Static Load Rating (kN):146; Seals or Shields:Open Type; Availability:In Stock; Clearance:C3; Grease Limiting Speed (r/min):2400; Cage Type:Brass; Weight:5.96 KGS; |
| AHX3218 Withdrawal Sleeve (matched Bearing:23218CCK/W33) | Dynamic Load Rating (kN):52.5; d:60mm; Weight:0.02 KGS; SKU:6212zzc3-nsk; Clearance:C3; Limiting Speed Rating (r/min):5600; Static Load Rating (kN):36; B:22mm; D:110mm; Cage Type:Steel; |
| 99374 / CR99374 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; Static Load Rating (kN):40200; B:30.2mm; Weight:0.02 KGS; Dynamic Load Rating (kN):50700; Availability:In Stock; Oil Limiting Speed (r/min):4600; Seals or Shields:Two Rubber Seals; Grease Limiting Speed (r/min):4000; Cage Type:Plastic; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
87555 / CR87555 Stainless Speedi Sleeve For Shaft Repair Video