| No. | Brand | J | F | f | T | A | s | S | r |
| FJ1200 | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| IP20/IP44/IP67 | - | - | - | - | - | - | - | - | - |
| 9234004 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| PartsSH100 | - | - | - | - | - | - | - | - | - |
| Ye2 | - | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| BMP50/OMP50 | - | - | - | - | - | - | - | - | - |
| [2 | - | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| 2016-2018 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| 6304-2Z/C3-2RS2/C3GFG | INA | - | - | - | - | - | - | - | - |
| 18*10W | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | 46.4 mm | 34.5 mm | - | - | - |
| 87785 / CR87785 Stainless Speedi Sleeve For Shaft Repair | B:78.00 mm; D:400.0000 mm; Fillet Radius rb:1.50 mm; d:190.000 mm; Basic Static Radial Load Rating Co:570000 N; Fillet Radius ra:4.00 mm; Oil Speed Rating n2:1700 rpm; Basic Dynamic Radial Load Rating C:416000 N; Grease Speed Rating n1:1200 rpm; |
| AH24056G Withdrawal Sleeve Supplier | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; Basic Static Radial Load Rating Co:62000 N; Grease Speed Rating Open/Shielded n1:5000 rpm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:99500 N; Accessories:Two Seals; B:33.00 mm; d:55.000 mm; |
| 99359 / CR99359 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):20000; Weight:0.02 KGS; d:20mm; Reference Speed Rating (r/min):32000; B:14mm; Availability:In Stock; Static Load Rating (kN):3.4; Clearance:C3; Cage Type:Plastic; D:47mm; |
| AOHX3096G (23096CAK/W33, C3096KM, 23096CAK, 23096CCK Bearing Withdrawal Sleeve) | Availability:In Stock; B:58mm; d:130mm; Weight:16.70 KGS; Fatigue Load Rating (kN):15.6; Dynamic Load Rating (kN):275; Static Load Rating (kN):300; Reference Speed Rating (r/min):2600; Cage Type:Brass; Clearance:Standard; |
| AH3036 Withdrawal Sleeve(matched Bearing:23036CAK,23036CCK,23036CCK/W33, C3036K) | Cage Type:Plastic; Availability:In Stock; Weight:0.02 KGS; D:110mm; Dynamic Load Rating (kN):65; Grease Limiting Speed (r/min):5000; SKU:2310-2rstnc3-nsk; Seals or Shields:Two Rubber Seals; B:40mm; d:50mm; |
| TMDT 2-32 Insulated Surface Probe | D:420.0000 mm; Sealed Speed Rating n3:890 rpm; d:280.000 mm; Accessories:Two Seals; Fillet Radius ra:3.00 mm; Oil Speed Rating Open/Shielded n2:1700 rpm; Basic Dynamic Radial Load Rating C:302000 N; Grease Speed Rating Open/Shielded n1:1400 rpm; Basic Static Radial Load Rating Co:405000 N; B:65.00 mm; |
| FTRE7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x3mm | Da min.:93 mm; rb max.:1 mm; d:70 mm; Basic static load rating C0:112 kN; Reference speed:5000 r/min; C:16 mm; d1 ≈:84.7 mm; Limiting speed:6000 r/min; B:20 mm; r3,4 min.:1 mm; |
| AS130170 Thrust Needle Roller Bearing Washer 130x170x1mm | D:600mm; Limiting Speed Rating (r/min):530; B:192mm; Dynamic Load Rating (kN):4660; d:360mm; Static Load Rating (kN):7300; SKU:23172embw509c08c3-ti; Availability:In Stock; Clearance:C3; Cage Type:Brass; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves AH308 35*29mm Video