| No. | Brand | J | F | f | T | A | s | S | r |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| J05E | - | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| Q235 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| T6DCM | - | - | - | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| 16058 | - | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 42060 | - | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| 1250*2500 | - | - | - | - | - | - | - | 4.763 mm | - |
| GE17-FO-2RS | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 99368 / CR99368 Stainless Speedi Sleeve For Shaft Repair | Limiting speed:4300 r/min; Calculation factor Y0:0.8; Calculation factor Y:1.35; Fatigue load limit Pu:33.5 kN; Db min.:141 mm; D:152.4 mm; B:36.322 mm; db min.:106.5 mm; da max.:104 mm; d:92.075 mm; |
| CR39275 / CR-39275-USA Oil Seal 100.03*126.97*11.13mm | Static Load Rating (kN):51; Dynamic Load Rating (kN):133; B:45mm; Limiting Speed Rating (r/min):4300; D:200mm; Clearance:Standard; Seals or Shields:Open Type; Weight:0.02 KGS; Cage Type:Steel; SKU:1319-skf; |
| 99399 / CR99399 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Clearance:Standard; Dynamic Load Rating (kN):162; Preload:Light; D:190mm; Availability:In Stock; Oil Limiting Speed (r/min):11900; Weight:0.02 KGS; SKU:7221ctrsulp3-nsk; d:105mm; |
| 87555 / CR87555 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Static Load Rating (kN):3.1; Weight:0.04 KGS; Cage Type:Steel; Fatigue Load Rating (kN):0.208; SKU:6201-c-hrs-c3-fag; Seals or Shields:Single Rubber Seal; d:12mm; Limiting Speed Rating (r/min):22400; D:32mm; |
| CR99098 Stainless Steel Speedi Sleeve For Shaft Repair | ra max.:4 mm; db min.:338 mm; Fatigue load limit Pu:480 kN; da max.:411 mm; Basic static load rating C0:6300 kN; Operating clearance factor k2:0.096; D:540 mm; d2 ≈:371 mm; B2:42 mm; Da min.:452 mm; |
| TRE1828 Thrust Bearing Ring / Thrust Needle Bearing Washer 28.575x44.45x4mm | D:340mm; Clearance:Standard; Weight:40.70 KGS; Cage Type:Brass; Static Load Rating (kN):2290; Seals or Shields:Open Type; Reference Speed Rating (r/min):1400; Dynamic Load Rating (kN):1660; B:112mm; d:200mm; |
| AHX2326G Withdrawal Sleeve(matched Bearing:22326CCK/W33) | D:110mm; SKU:1212kj-qbl; B:22mm; Clearance:Standard; Availability:In Stock; Seals or Shields:Open Type; d:60mm; Weight:0.02 KGS; Cage Type:Steel; |
| AHX215 Withdrawal Sleeve 70x75x34.5mm | Cage Type:Steel; B:23mm; Seals or Shields:Two Rubber Seals; d:40mm; Clearance:C3; Dynamic Load Rating (kN):40.5; SKU:6308dduc3-nsk; D:90mm; Reference Speed Rating (r/min):--; Static Load Rating (kN):24; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
87820 / CR87820 Stainless Speedi Sleeve For Shaft Repair Video