| AOHX30/560 (230/560CAK/W33, C30/560KM, 230/560CAK, 230/560CCK Bearing Withdrawal Sleeve) | Da max.:50.4 mm; Reference grease quantity Gref:1.7 cm³; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:17; Static axial stiffness, preload class A:79 N/µm; Preload class A GA:80 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; rb max.:0.6 mm; da min.:34.6 mm; |
| 7 mm x 22 mm x 7 mm FTRC2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x2mm | Basic static load rating C0:510 kN; B:38.887 mm; da max.:50.7 mm; dk:63.881 mm; Lubricant:Regular relubricatio; b1:5 mm; D:71.438 mm; Da max.:67.4 mm; α:6 °; Basic dynamic load rating C:170 kN; Size (mm):7 mm x 22 mm x 7 mm ; |
| TKDT 10 Contact Thermometer | Basic static load rating C0:500 kN; d1 ≈:120.76 mm; r3,4 min.:2.5 mm; Basic dynamic load rating C:404 kN; d:80 mm; Limiting speed:4000 r/min; a:40.528 mm; Cb min.:13.5 mm; Dimension series:2GD; Ca min.:7 mm; |
| TMDT 2-33 Right Angle Surface Probe | Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:8mm; Clearance:Standard; d:12mm; Static Load Rating (kN):6.4; SKU:2mm9101wicrdum-timke; Speed Rating (r/min):57300; Dynamic Load Rating (kN):2.9; |
| TRB3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x1.6mm | Cage Type:Plastic; Availability:In Stock; Clearance:Standard; B:15mm; Speed Rating (r/min):2900; D:72mm; d:35mm; Dynamic Load Rating (kN):45.4; Weight:0.29 KGS; Seals or Shields:Open Type; |
| 99359 / CR99359 Stainless Speedi Sleeve For Shaft Repair | Limiting Speed Rating (r/min):20000; Weight:0.02 KGS; d:20mm; Reference Speed Rating (r/min):32000; B:14mm; Availability:In Stock; Static Load Rating (kN):3.4; Clearance:C3; Cage Type:Plastic; D:47mm; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
| AHX3122 Withdrawal Sleeve(matched Bearing:2222K, 23122CCK/W33, 22222EK, C3022K, C2222K) | d:9.000 mm; Oil Speed Rating Open/Shielded n2:34000 rpm; Accessories:Two Shields; Fillet Radius ra:0.64 mm; B:8.00 mm; Sealed Speed Rating n3:20000 rpm; Grease Speed Rating Open/Shielded n1:28000 rpm; D:26.0000 mm; Basic Dynamic Radial Load Rating C:4620 N; Basic Static Radial Load Rating Co:1960 N; |