| 90802 / CR90802 Stainless Speedi Sleeve For Shaft Repair | SKU:7002ctrdulp3-nsk; Availability:In Stock; Grease Limiting Speed (r/min):49000; Clearance:Standard; d:15mm; Static Load Rating (kN):3.4; Preload:Light; D:32mm; Weight:0.02 KGS; Oil Limiting Speed (r/min):74500; |
| AHX319 Withdrawal Sleeve (matched Bearing:2219K, 1319K, 22219EK, 21319CCK, C2219K) | d:12mm; Weight:0.02 KGS; Availability:In Stock; Cage Type:Plastic; D:32mm; Seals or Shields:Two Rubber Seals; Clearance:Standard; SKU:2201e-2rs1tn9-qbl; B:14mm; |
| CPR12130225 Thrust Plate 130x225x12mm | B:28 mm; Material constant KM:330; d2 max.:94 mm; α:6 °; Basic static load rating C0:140 kN; r1 min.:0.6 mm; Mass rod end:1.85 kg; Specific dynamic load factor K:100 N/mm²; G:M 39x3; d:40 mm; |
| ZM80 Precision Locknut (M80x2)x105x18mm | D:210mm; Seals or Shields:Open Type; Weight:0.12 KGS; Availability:In Stock; B:52mm; d:85mm; Cage Type:Steel; SKU:6417-qbl; Clearance:Standard; |
| AHX2322G Withdrawal Sleeve(matched Bearing:2322K, 22322EK) | Sealed Speed Rating n3:1600 rpm; d:160.000 mm; Basic Static Radial Load Rating Co:143000 N; Accessories:One Shield; B:38.00 mm; D:240.0000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:143000 N; |
| AH219 Withdrawal Sleeve 90x95x43mm | db min.:774 mm; D:980 mm; Fatigue load limit Pu:1830 kN; r1,2 min.:4 mm; d:690 mm; ra max.:3 mm; Basic static load rating C0:27000 kN; s max.:105 mm; b:22.3 mm; Da max.:960 mm; |
| 99599 / CR 99599 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):1080; Cage Type:Brass; SKU:23038-e1a-k-m-c3-fag; Seals or Shields:Open Type; Fatigue Load Rating (kN):180; Clearance:C3; Availability:In Stock; Limiting Speed Rating (r/min):2400; Static Load Rating (kN):1550; Weight:0.02 KGS; |
| AOH31/750 (231/750CAK, 231/750CCK, 231/750CAK/W33, C31/750KMB Bearing Withdrawal Sleeve) | Hexagonal key size for grub screw N:3.969 mm; Fatigue load limit Pu:0.8 kN; s1:30.2 mm; Recommended tightening torque for grub screw:6.5 N·m; r1,2 min.:1 mm; Basic static load rating C0:19 kN; D:80 mm; Basic dynamic load rating C:24.7 kN; Thread grub screw G2:5/16-24 UNF; Calculation factor f0:14; |