| No. | Brand | J | F | f | T | A | s | S | r |
| Xk6140 | - | - | - | - | - | - | - | - | - |
| 40BCV09S1-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 020.40.1800 | - | - | - | - | - | - | - | - | - |
| Ap5s53 | Hitachi | - | - | - | - | - | - | - | - |
| Dh220 | - | - | - | - | - | - | - | 4.763 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (DM-9600) | - | - | - | - | - | - | - | - | - |
| 52Pcs | - | - | - | - | - | - | - | - | - |
| 16X8 | - | - | - | - | - | - | - | - | - |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| 24148-E1 | fag | - | - | - | - | - | - | - | - |
| 9o-1b20-0223-0547-1 | - | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| TRA613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x0.8mm | d:190mm; SKU:23038camke4c3-nsk; Dynamic Load Rating (kN):775; Availability:In Stock; Static Load Rating (kN):1350; Oil Limiting Speed (r/min):1400; D:290mm; Seals or Shields:Open Type; Weight:17.60 KGS; Clearance:C3; |
| FTRA2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x1mm | B:102mm; Seals or Shields:Open Type; Cage Type:Brass; Static Load Rating (kN):1590; D:300mm; SKU:22328came4c3-nsk; Dynamic Load Rating (kN):1160; Grease Limiting Speed (r/min):1200; d:140mm; Oil Limiting Speed (r/min):1500; |
| AH217 Withdrawal Sleeve 80x85x38.5mm | Static Load Rating (kN):238.2; Availability:In Stock; B:40mm; Clearance:Standard; d:130mm; D:230mm; Seals or Shields:Open Type; Speed Rating (r/min):6100; Cage Type:Plastic; Dynamic Load Rating (kN):222.4; |
| CPR985150 Thrust Plate 85x150x9mm | Mass bearing:0.32 kg; db min.:73 mm; Basic static load rating C0:80 kN; Calculation factor e:0.35; ra max.:1 mm; B:17 mm; r1,2 min.:1 mm; d1 ≈:78.8 mm; Reference speed:5600 r/min; C:14 mm; |
| 75 mm x 115 mm x 20 mm FTRC3552 Thrust Bearing Ring / Thrust Needle Bearing Washer 35x52x2mm | d:90mm; Availability:In Stock; Cage Type:Steel; B:30mm; D:160mm; Clearance:C3; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:1218jc3-qbl; Size (mm):75 mm x 115 mm x 20 mm ; |
| 99284 / CR99284 Stainless Steel Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):9.7; Cage Type:Steel; Seals or Shields:Open Type; Clearance:Standard; d:12mm; Reference Speed Rating (r/min):--; D:37mm; Availability:In Stock; Weight:0.02 KGS; Limiting Speed Rating (r/min):20000; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
| TRA2233 Thrust Bearing Ring / Thrust Needle Bearing Washer 34.925x52.375x0.8mm | SKU:3314anr-skf; Clearance:Standard; Limiting Speed Rating (r/min):4300; Dynamic Load Rating (kN):163; Seals or Shields:Open Type; Static Load Rating (kN):125; Reference Speed Rating (r/min):4300; Weight:5.05 KGS; d:70mm; Fatigue Load Rating (kN):5; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
MSR48x1.5 Precision Locknut / MSR-M48x1.5 Locking Nut (M48x1.5)x68x25mm Video