| No. | Brand | J | F | f | T | A | s | S | r |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| 32222 | fag | - | - | - | - | - | - | - | - |
| OMR125 | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| PWD00A-400-18 | Parker | - | - | - | - | - | - | - | - |
| 50T-26-F-R | - | - | - | - | - | - | - | - | - |
| 5182A | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| 12feet | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| 3/4/5/6/7/8/9MM | - | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 2211 | NSK | - | - | - | - | - | - | - | - |
| N21% | - | - | - | - | - | - | - | - | - |
| 7212CTRDUDLP3 | NSK | - | - | - | - | - | - | - | - |
| OSB3 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| (10) | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| 99438 / CR99438 Stainless Speedi Sleeve For Shaft Repair | Dynamic Load Rating (kN):93.5; Weight:0.02 KGS; Clearance:Standard; d:44.45mm; Oil Limiting Speed (r/min):5800; Grease Limiting Speed (r/min):4300; Cage Type:Steel; Static Load Rating (kN):125; D:88.9mm; Availability:In Stock; |
| FTRD90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x2.5mm | Basic Dynamic Radial Load Rating 15 B Bearing C2:108000 N; d:65.000 mm; Basic Static Radial Load Rating 40 AA Pair Co1:224000 N; Angle Third:40 º; Basic Dynamic Radial Load Rating 40 AA Pair C1:208000 N; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating 15 B Bearing Co2:80000 N; Fillet Radius rb:1.00 mm; B:99.00 mm; Grease Speed Rating n1:4300 rpm; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| MSR20x1.5 Precision Locknut / MSR-M20x1.5 Locking Nut (M20x1.5)x40x18mm | Clearance:C3; Static Load Rating (kN):93; Fatigue Load Rating (kN):5.4; Limiting Speed Rating (r/min):8000; Cage Type:Brass; Reference Speed Rating (r/min):4800; Weight:3.30 KGS; B:34mm; D:180mm; Seals or Shields:Open Type; |
| 90156 / CR90156 Stainless Speedi Sleeve For Shaft Repair | D:72mm; Availability:In Stock; Seals or Shields:Single Rubber Seal; d:30mm; Clearance:C3; Cage Type:Steel; SKU:6306-rsr-c3-fag; Limiting Speed Rating (r/min):6300; B:19mm; Static Load Rating (kN):16.3; |
| 99726 / CR99726 Stainless Speedi Sleeve For Shaft Repair | d:320mm; Weight:77.40 KGS; SKU:23064embw507c08c4-ti; B:121mm; Cage Type:Brass; D:480mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2410; Static Load Rating (kN):3880; Limiting Speed Rating (r/min):880; |
| Withdrawal Sleeves AH208 | Limiting Speed Rating (r/min):10000; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; Dynamic Load Rating (kN):15.9; d:10mm; B:22mm; Minimum Load Factor:0.0038; Cage Type:Steel; SKU:52202-skf; |
| AH234 Withdrawal Sleeve 160x170x69mm | Fatigue Load Rating (kN):0.67; d:30mm; Reference Speed Rating (r/min):20000; Static Load Rating (kN):16; Limiting Speed Rating (r/min):11000; Availability:In Stock; Condition:New; Weight:0.02 KGS; Clearance:C3; D:72mm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
MSR40x1.5 Precision Locknut / MSR-M40x1.5 Locking Nut (M40x1.5)x58x22mm Video