| No. | Brand | J | F | f | T | A | s | S | r |
| 6219-2Z/C3 | - | - | - | - | - | - | - | - | - |
| NA4914 | INA | - | - | - | - | - | - | - | - |
| 6304-2RS | SKF | - | - | - | - | - | - | - | - |
| 1220*2440 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 2FRM16-32/60L/J | Rexroth | - | - | - | - | - | - | - | - |
| (NH4) | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 19360 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 6206-2RS1/C3 | SKF | - | - | - | - | - | - | - | - |
| 10W | - | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| AHX332 Withdrawal Sleeve 150x160x88mm | B:4mm; Weight:0.20 KGS; SKU:f623-zen; Seals or Shields:Open Type; Cage Type:Steel; Availability:In Stock; Clearance:Standard; D:10mm; d:3mm; |
| AH30/1000 Withdrawal Sleeve 950x1000x365mm | dk:100.33 mm; ra max.:2 mm; M:6.5 mm; Material constant KM:330; Basic static load rating C0:1270 kN; rb max.:1 mm; Da max.:105.7 mm; Da min.:96 mm; α:8 °; d:63.5 mm; |
| 87529 / CR87529 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:14mm; d:35mm; Static Load Rating (kN):13; Availability:In Stock; Oil Limiting Speed (r/min):31000; Preload:Medium; Clearance:Standard; D:62mm; SKU:7007ctrqulp3-nsk; |
| 99601 / CR 99601 Stainless Speedi Sleeve For Shaft Repair | Recommended diameter for attachment bolts, mm G:12 mm; Recommended tightening torque for grub screw:6.5 N·m; Housing material:Composite for food a; B:42.9 mm; J:92 mm; Limiting speed:3200 r/min; L:118 mm; Thread grub screw G2:5/16-24 UNF; A1:17 mm; Db:90 mm; |
| 99450 / CR 99450 Stainless Speedi Sleeve For Shaft Repair | Preload:Light; d:70mm; Seals or Shields:Open Type; Clearance:Standard; Dynamic Load Rating (kN):126; Cage Type:Plastic; Grease Limiting Speed (r/min):7500; B:35mm; Weight:0.02 KGS; Availability:In Stock; |
| AHX334 Withdrawal Sleeve 160x170x93mm | Permissible angular misalignment α:3 °; r1,2 min.:1.5 mm; Da max.:91 mm; Basic static load rating C0:19.3 kN; Limiting speed:9000 r/min; da max.:60 mm; Fatigue load limit Pu:1 kN; Calculation factor Y1:1.9; D1 ≈:86 mm; Calculation factor e:0.33; |
| CPR84585 Thrust Plate 45x85x8mm | Fatigue Load Rating (kN):0.08; Preload:Medium; B:7mm; D:28mm; Seals or Shields:Open Type; Cage Type:Plastic; d:15mm; Static Load Rating (kN):1.9; Grease Limiting Speed (r/min):56000; Availability:In Stock; |
| 99313 / CR99313 Stainless Speedi Sleeve For Shaft Repair | l7 min.:55 mm; d2 max.:104 mm; l5 ≈:30 mm; w:55 mm; h1:145 mm; Basic static load rating C0:224 kN; r1 min.:0.6 mm; dk:60 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
MSR20x1 Precision Locknut / MSR-M20x1 Locking Nut (M20x1)x40x18mm Video