| No. | Brand | J | F | f | T | A | s | S | r |
| 801002 | - | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| Rhb306 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 40x90x23 | - | - | - | - | - | - | - | - | - |
| CY14-1B | INA | - | - | - | - | - | - | - | - |
| 018/020/045/050/057/063/074/081/098/106/131/141 | - | - | - | - | - | - | - | - | - |
| 23122 | - | - | - | - | - | - | - | - | - |
| 962985 | - | - | - | - | - | - | - | - | - |
| 1000d | INA | - | - | - | - | - | - | - | - |
| 429,460. | - | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| NUP2310 | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| 37X13.50R20 | - | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| NU2220WC3 | NSK | - | - | - | - | - | - | - | - |
| AHX213 Withdrawal Sleeve 65x60x32.5mm | Mass lock washer:0.04 kg; M:57.5 mm; d1:73 mm; B:2.5 mm; f:8 mm; d2:86 mm; d:60 mm; |
| FTRD80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x2.5mm | Basic Static Radial Load Rating Co:176000 N; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Oil Speed Rating n2:3600 rpm; B:49.20 mm; Accessories:Shield & Seal; D:150.0000 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:142000 N; Fillet Radius ra:2.00 mm; |
| 87623 / CR87623 Stainless Speedi Sleeve For Shaft Repair | Calculation factor e:0.33; Basic static load rating C0:2900 kN; D1 ≈:351 mm; Calculation factor Y0:2; Reference speed:1200 r/min; Mass bearing + sleeve:100 kg; d2 ≈:249 mm; d1:190 mm; B2 ≈:177 mm; Da max.:400 mm; |
| 87015 / CR87015 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Plastic; Fatigue Load Rating (kN):0.915; Availability:In Stock; d:12mm; D:55mm; B:25mm; Weight:0.37 KGS; Dynamic Load Rating (kN):16.8; Clearance:Standard; Static Load Rating (kN):24.5; |
| TRD5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x3.2mm | Basic dynamic load rating C:19 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 22x30x4; Ew:30 mm; Basic static load rating C0:23.6 kN; Fw:22 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 22x30x4; Limiting speed:19000 r/min; Reference speed:17000 r/min; Mass needle roller and cage assembly:0.018 kg; U:15 mm; |
| 90004 / CR90004 Stainless Speedi Sleeve For Shaft Repair | d:15mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):11.2; Weight:0.02 KGS; Cage Type:Plastic; Limiting Speed Rating (r/min):18000; Static Load Rating (kN):6.8; SKU:3202atn9-skf; Availability:In Stock; B:15.9mm; |
| CR99118 Stainless Steel Speedi Sleeve For Shaft Repair | B:9mm; Dynamic Load Rating (kN):5.85; d:15mm; Static Load Rating (kN):2.85; Fatigue Load Rating (kN):0.12; D:32mm; Availability:In Stock; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; SKU:6002-2rshnr-skf; |
| AOH3276G(23276CAK/W33, 23276CAK, 23276CCK Bearing Withdrawal Sleeve) | D:170mm; Dynamic Load Rating (kN):391; Availability:In Stock; Static Load Rating (kN):534; B:45mm; Weight:3.60 KGS; Limiting Speed Rating (r/min):2900; d:110mm; Cage Type:Steel; Seals or Shields:Open Type; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
90546 / CR90546 Stainless Speedi Sleeve For Shaft Repair Video