| No. | Brand | J | F | f | T | A | s | S | r |
| CX130B 4JJ1 | - | - | - | - | - | - | - | - | - |
| 3G | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| (10-5-10) | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| J05E | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 46 | - | - | - | - | - | - | - | - | - |
| NJ316 | NSK | - | - | - | - | - | - | - | - |
| KM-29 | SKF | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| SM1212 | - | - | - | - | - | - | - | - | - |
| 3/4/5/6/7/8/9MM | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| MBX80 | NTN | - | - | - | - | - | - | - | - |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| AOH30/530 (230/530CAK/W33, C30/530K, 230/530CAK, 230/530CCK Bearing Withdrawal Sleeve) | Grease Limiting Speed (r/min):380; D:650mm; Cage Type:Brass; Seals or Shields:Open Type; Static Load Rating (kN):8550; Availability:In Stock; Dynamic Load Rating (kN):4800; Clearance:Standard; B:232mm; d:360mm; |
| AOH3152G(23152CCK, 23152CAK, 23152CCK/W33, C3152K Bearing Withdrawal Sleeve) | B:24mm; Dynamic Load Rating (kN):66.3; Grease Limiting Speed (r/min):9500; Preload:Light; SKU:7214acdga/p4a-skf; Static Load Rating (kN):55; Weight:1.10 KGS; d:70mm; Clearance:Standard; Fatigue Load Rating (kN):2.36; |
| CR99826 Stainless Steel Speedi Sleeve For Shaft Repair | Preload:Medium; Weight:1.95 KGS; B:28mm; d:110mm; Availability:In Stock; Seals or Shields:Open Type; SKU:7022acdgb/p4a-skf; Static Load Rating (kN):104; Grease Limiting Speed (r/min):7000; Cage Type:Plastic; |
| TMDT 2-31 Magnetic Surface Probe | Clearance:C3; SKU:23140kembw33c3-timke; Reference Speed Rating (r/min):1400; B:112mm; Weight:40.70 KGS; d:200mm; D:340mm; Dynamic Load Rating (kN):1660; Static Load Rating (kN):2290; Availability:In Stock; |
| TRD613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x3.2mm | Availability:In Stock; Limiting Speed Rating (r/min):3200; Fatigue Load Rating (kN):76.5; B:69.8mm; Weight:0.02 KGS; SKU:23222cck/w33-skf; Reference Speed Rating (r/min):2200; Seals or Shields:Open Type; Static Load Rating (kN):765; Cage Type:Steel; |
| TRE6074 Thrust Bearing Ring / Thrust Needle Bearing Washer 95.25x117.475x4mm | D:1060 mm; da min.:1032 mm; d:900 mm; ra max.:4 mm; Basic static load rating C0:27000 kN; d1:1054 mm; Reference speed:150 r/min; r1,2 min.:5 mm; Fatigue load limit Pu:1500 kN; Limiting speed:300 r/min; |
| TRA4458 Thrust Bearing Ring / Thrust Needle Bearing Washer 69.85x92.075x0.8mm | Clearance:Standard; Seals or Shields:Open Type; D:55mm; SKU:7006cd/p4adgb-skf; Dynamic Load Rating (kN):14.3; Cage Type:Plastic; d:30mm; Fatigue Load Rating (kN):0.34; B:13mm; Grease Limiting Speed (r/min):32000; |
| AOH30/750 (230/750CAK,230/750CCK,230/750CAK/W33, C30/750KMB Bearing Withdrawal Sleeve) | d2:114.2 mm; Calculation factor f2B:1.03; Basic dynamic load rating C:44.9 kN; Calculation factor f0:9.5; Number of balls z:27; Calculation factor fHC:1.01; D2:136 mm; Ball diameter Dw:12.7 mm; ra max.:1.5 mm; Fatigue load limit Pu:1.5 kN; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
87914 / CR87914 Stainless Speedi Sleeve For Shaft Repair Video