| No. | Brand | J | F | f | T | A | s | S | r |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| 650 | - | - | - | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| NF-422 | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 018/020/045/050/057/063/074/081/098/106/131/141 | - | - | - | - | - | - | - | - | - |
| 121400202001) | - | - | - | - | - | - | - | - | - |
| 6N1 | SKF | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 56650 | Timken | - | - | - | - | - | - | - | - |
| 5PCS | - | - | - | - | - | - | - | - | - |
| .25mm | - | - | - | - | - | - | - | - | - |
| EX200-2 | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 7202BBTVP | fag | - | - | - | - | - | 14 mm | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| (18mm, | - | - | - | - | - | 40 mm | - | - | - |
| NU306E.M1 | fag | - | 155 mm | - | - | - | - | - | - |
| SUZUKI,,SX4 | - | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| ZM10 Precision Locknut (M10x1)x18x8mm | d:70 mm; M:66.5 mm; Mass lock washer:0.053 kg; B:2.5 mm; d1:85 mm; f:8 mm; d2:98 mm; |
| 90546 / CR90546 Stainless Speedi Sleeve For Shaft Repair | SKU:7207a5trqump3-nsk; Weight:0.29 KGS; Cage Type:Plastic; Availability:In Stock; D:72mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):29.1; B:17mm; Grease Limiting Speed (r/min):18700; Clearance:Standard; |
| CR99226 Stainless Steel Speedi Sleeve For Shaft Repair | SKU:22226e/c4-skf; Fatigue Load Rating (kN):88; Availability:In Stock; Dynamic Load Rating (kN):735; Clearance:C4; Weight:0.02 KGS; Reference Speed Rating (r/min):2600; d:130mm; Seals or Shields:Open Type; B:64mm; |
| CR99837 Stainless Steel Speedi Sleeve For Shaft Repair | d:55.000 mm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Static Radial Load Rating Co:90000 N; D:140.0000 mm; B:33.00 mm; Accessories:One Shield & Snap-Ri; Grease Speed Rating Open/Shielded n1:4100 rpm; Basic Dynamic Radial Load Rating C:108000 N; Fillet Radius ra:2.00 mm; |
| 99721 / CR99721 Stainless Speedi Sleeve For Shaft Repair | B:53mm; Cage Type:Brass; Seals or Shields:Open Type; SKU:23028-e1a-k-m-c3-qbl; Weight:0.02 KGS; Availability:In Stock; d:140mm; Clearance:C3; D:210mm; |
| 90769 / CR90769 Stainless Speedi Sleeve For Shaft Repair | PG:1/4 NPT; P90°:81.4 kN; End plug (suffix Y):EPR 14; P150°:46.3 kN; Initial grease fill:181.44 g; N1:25.4 mm; da:107.95 mm; P120°:50.7 kN; L:387.35 mm; Cap bolt:2 x 3/4-10 UNC; |
| 99473 / CR 99473 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; B:24mm; Weight:0.02 KGS; Availability:In Stock; Clearance:C3; d:25mm; SKU:2305e-2rs1tn9/c3-qbl; Cage Type:Plastic; D:62mm; |
| AOH3048 Withdrawal Sleeve(23048CAK,23048CCK/W33, C3048K Bearing Sleeve) | Basic static load rating C0:3250 kN; d:110 mm; r2 min.:1 mm; Da min.:141.5 mm; da min.:118 mm; r1 min.:1 mm; D:160 mm; Specific dynamic load factor K:100 N/mm²; C:55 mm; Lubricant:Regular relubricatio; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
90806 / CR90806 Stainless Speedi Sleeve For Shaft Repair Video