| No. | Brand | J | F | f | T | A | s | S | r |
| X90 | - | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 15X35X11 | - | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 12mm | INA | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| [25 | - | - | - | - | - | - | - | - | - |
| 121400202001) | - | - | - | - | - | - | - | - | - |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| PC450-8 | - | - | - | - | - | - | - | 2.5 mm | - |
| 400W | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| 21.15 | - | - | - | - | - | - | - | - | - |
| ,I010 | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| Chloride30% | - | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| 480W | - | - | - | - | - | - | - | - | - |
| 84962 / CR84962 Stainless Speedi Sleeve For Shaft Repair | Accessories:Two Shields; B:38.00 mm; Sealed Speed Rating n3:1600 rpm; Basic Dynamic Radial Load Rating C:143000 N; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:143000 N; d:160.000 mm; Grease Speed Rating Open/Shielded n1:2400 rpm; D:240.0000 mm; Oil Speed Rating Open/Shielded n2:3000 rpm; |
| AH324 Withdrawal Sleeve 115x120x69mm | d:45mm; Availability:In Stock; Weight:0.02 KGS; SKU:2309tn-qbl; Cage Type:Plastic; Clearance:Standard; D:100mm; Seals or Shields:Open Type; B:36mm; |
| CR99873 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; Weight:0.02 KGS; Cage Type:Brass; Seals or Shields:Open Type; Clearance:Standard; SKU:23248-b-k-mb-qbl; d:240mm; D:440mm; B:160mm; |
| CPR990155 Thrust Plate 90x155x9mm | Dynamic Load Rating (kN):16.8; Clearance:C3; Static Load Rating (kN):7.8; D:52mm; B:15mm; Condition:New; Cage Type:Steel; Limiting Speed Rating (r/min):9500; Weight:0.02 KGS; SKU:6304-2rsh/c3gjn-skf; |
| CR99200 Stainless Steel Speedi Sleeve For Shaft Repair | Availability:In Stock; Cage Type:Steel; d:17mm; Reference Speed Rating (r/min):--; SKU:6303zz-nsk; Weight:0.02 KGS; Limiting Speed Rating (r/min):15000; Fatigue Load Rating (kN):--; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):13.6; |
| HMV142E / HMV 142E Hydraulic Nut 712x870x93mm | Dynamic Load Rating (kN):64; Cage Type:Brass; Availability:In Stock; B:21mm; Seals or Shields:Open Type; Fatigue Load Rating (kN):2.16; D:80mm; Clearance:Standard; SKU:qj307ma-skf; Limiting Speed Rating (r/min):15000; |
| TMAS 340 Machinery Shim Kit | Clearance:Standard; Preload:Light; Dynamic Load Rating (kN):5.6; Grease Limiting Speed (r/min):50000; B:8mm; Availability:In Stock; Weight:0.02 KGS; d:12mm; Cage Type:Plastic; Seals or Shields:Open Type; |
| TRD1427 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x42.85x3.2mm | Basic dynamic load rating C:84.8 kN; Db min.:76 mm; d1 ≈:65.3 mm; D:80 mm; Da max.:73.5 mm; Limiting speed:8000 r/min; Dimension series:2CE; Mass bearing:0.45 kg; r3,4 min.:1 mm; Calculation factor e:0.31; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
99800 / CR99800 Stainless Speedi Sleeve For Shaft Repair Video